623977
13
Zoom out
Zoom in
Previous page
1/24
Next page
1: Plug - Insert this standard 3-pin XLR plug into
your the included Samson Q7 or any dynamic
microphone.
2: LCD DisplayThis three digit Liquid Crystal
Display indicates the Absolute Channel
number that the transmitter is set to.
3: Audio On switch – This switch is used to
temporarily turn off the audio output of the
transmitter. Move this switch away from “ON”
to turn off the output and move the switch in
the direction of ON” to turn the output on.
4: IR Lens - This acrylic window is used to
capture the infrared signal sent from the
AR300 during the IR SET to channelize the
AX300.
5: Power switch - Move this switch in the
direction of the arrow to turn the AR300
power; move it away from the arrow to turn
power off.
6: Power / Battery LED - This red LED flashes
once when the AX300 is first turned
indicating the transmitter has power. It will
remain off as long as they battery is a good
operating level. The LED lights steadily red
when there are less than 2 hours of battery
power remaining, indicating that the battery
needs to be changed. In order to avoid
compromising audio fidelity (or having the
AX300 stop working completely), you should
always replace the battery with a fresh one immediately whenever this LED lights
red.
7: Gain - Move this control in the direction of the arrow (counterclockwise) to reduce
the output of the AX300 when the speaker’s or singers voice is putting out too hot
of a signal. See the “Setting Up and Using Your Synth AirLine Synth System” section on
page 15 in this manual.
319
1
2
3
Guided Tour - AX300 Transmitter
13
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson AirLine Synth Wireless System at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson AirLine Synth Wireless System in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info