623977

Samson AirLine Synth Wireless System Manual

19
Zoom out
Zoom in
Previous page
1/24
Next page
AR300/AX300 Operation
Operating In FREE Mode
You can tune in an exact frequency using the AR300’s FREE mode. Once you are in FREE
mode you can change the frequency by 25 kHz steps. For most situations, it’s better to
use the GROUP channel plan but if you application requires an exact frequency, follow
these steps to operate in FREE mode.
1. Press the EDIT controller three times until the display’s FREE icon turns on and
Frequency number flashes.
2. Next, turn the EDIT controller until you reach the desired frequency number.
3. Once you have the desired frequency set on the AR300 you’re ready to transmit the
infrared channel data to the AX300. Have the transmitter ready in your hand with
the Power switch set to off.
4. Double click the EDIT controller and you see the display flash “IR SET” indicating
that the AX300 is sending the channel information over infrared transmission.
5. Now, position the transmitter about 6-inches from the front of the AR300 with the
AX300 IR receiver facing the AR300’s LCD display and turn the power on.
You will now see the corresponding Absolute Channel in the AX300 LCD display
indicating that the transmitter is matched to the receiver.
If you want to see the Absolute channel while the AR300 is in Free Mode, simply turn
the EDIT control and it will toggle between the exact Frequency and the Absolute
Channel.
To exit FREE Mode, just press the EDIT controller switch and you will return to the
Group and Absolute Channel fields. Once you are in the Group Channel or Absolute
Channel field and you have selected your channel, double click the EDIT control to
perform the IR set and lock in the channel. You can also use the Scan function to find
a clear channel by pressing and holding the EDIT knob. If you do not perform an IR set
or Channel Scan, the AR300 will return to Free Mode and the channel will be set to the
previously selected frequency.
19
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson AirLine Synth Wireless System at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson AirLine Synth Wireless System in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info