711612
11
Zoom out
Zoom in
Previous page
1/120
Next page
11
EN
NOTE
DO NOT ll the water tank above the SINGLE
CUP marking or the volume of the cup being used.
Otherwise it will overow, as the machine brews
until the water tank is empty.
2. Place your empty cup underneath the brew
basket outlet.
3. We recommend using cone lter basket insert
for single cups.
4. Insert the Cone lter basket into the brew
basket. Use the alignment marks as a guide.
5. Place a cone shaped paper lter into the cone
lter basket.
6. Grind the correct amount of whole bean coee
for the amount being brewed.
7. Select desired brewing mode.
8. Press START / CANCEL to begin brewing.
AUTO START
Allows you to automatically start brewing
at preset time.
1. Set lter basket type for the amount
of coee being brewed.
2. Select your brewing mode.
3. Fill the water tank with enough fresh cold water
for the amount of coee being brewed.
4. Insert the brew basket with your desired insert
or paper lter and add ground coee.
5. Insert the appropriate cup or the carafe with
the lid locked in place into the machine.
6. Press the AUTO START button.
FAST
GOLD
SET CLOCK STANDBY
KEEP WARM
EXIT
DESCALE
SOUND
SETTINGS
COLD BREW
MYBREW
POUROVER
STRONG
BLOOM TIME
BLOOM VOL.
BREW TEMP.
FLOW RATE
CUSTOMIZE
CARAFE LID
REMOVE
FILL
AUTO START
TANK!
TIME SINCE BREW
MIN
HEATING BLOOMING BREWING
AM
PM
HR
MAX
AT
7. The machine will prompt you to set the time
for Auto Start. Rotate the SELECT dial to adjust
Auto Start time, press SELECT dial to set.
Auto Start is now set and the machine will
enter Auto Start mode, brewing automatically
at the set Auto Start time.
NOTE
If the clock hasn’t been set, the machine will
prompt you to set the clock. Ensure the clock is
correct. The clock will reset every time the unit is
unplugged.
FAST
GOLD
SET CLOCK STANDBY
KEEP WARM
EXIT
DESCALE
SOUND
SETTINGS
COLD BREW
MYBREW
POUROVER
STRONG
BLOOM TIME
BLOOM VOL.
BREW TEMP.
FLOW RATE
CUSTOMIZE
CARAFE LID
REMOVE
FILL
AUTO START
TANK!
TIME SINCE BREW
MIN
HEATING BLOOMINGBREWING
AM
PM
HR
MAX
AT
8. Pressing START / CANCEL will cancel the set
AUTO START time.
SETTINGS
SET CLOCK: Set the time displayed on LCD.
DESCALE: Clear mineral build up on internal
components.
SOUND: Sound volume is adjustable and also
can be turned o.
STANDBY: Adjust time to automatically enter
STANDBY mode after a period of no use.
NEW FILTER: Update when a new lter is
installed in the machine.

To prevent children from possible danger,
child‑lock feature is available. Press and hold
AUTO START for 3 seconds. LCD
will display “CL” when it is locked. Repeat this
again or unplug the unit to unlock.
DEGREE INDICATION PREFERENCE
To switch between C° / F°, press the SELECT dial
and AUTO START button at the same time. Rotate
the SELECT dial to set preference.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sage BDC400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sage BDC400 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 6,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info