711612
12
Zoom out
Zoom in
Previous page
1/120
Next page
12
Care &
Cleaning
Always turn the coee machine o and remove the
plug from the power outlet before cleaning.
CLEANING THE COFFEE BASKET
AND MESH BASKET FILTER
Remove the coee basket. Discard any ground
coee and lter paper. The coee basket and
mesh basket lter can be rinsed under running
water. Ensure the ne holes of the mesh basket
lter are clear. For a deeper clean, wash the coee
basket and mesh basket lter in warm, soapy water
with a soft bristled brush.
CAUTION
The coee basket, mesh basket or paper lter
may still be very hot after brewing. Use caution and
allow to cool before removing.
CLEANING THE CARAFE
After each use, empty the carafe. Do not let brewed
coee stand overnight as this can cause the carafe
to stain. Rinse the carafe and carafe lid under warm
running water. For a deeper clean, we recommend
regularly washing the carafe in warm, soapy water
using a soft bristled brush. Do not use abrasive
cleansers, pads or cloths which can scratch the
surface. Rinse and dry thoroughly.
CLEANING THE SHOWERHEAD
Simply wipe down the showerhead area
periodically. However, if a more thorough clean
is required, the Showerhead can be removed by
unlocking the Showerhead Ring. Rotate clockwise
then remove the Showerhead for cleaning. Once
complete, reinstall the Showerhead.
CLEANING THE OUTER HOUSING
The outer housing and LCD screen can be
cleaned with a soft, damp cloth. Apply cleaner to
the cloth and not the LCD surface. Polish with a
soft, dry cloth. Cleaning and drying with dry paper
towels or abrasive cloths and cleaners may scratch
the surface.
REPLACING THE WATER FILTER
The provided water lter helps prevent scale
build‑up in and on many of the inner functioning
components. Replacing the water lter when
indicated on the screen or after 3 months will
reduce the need to descale.
KEEP WARM
* Applicable to the Sage
®
Precision Brewer
Glass (SDC400) only.
FAST
GOLD
SET CLOCK STANDBY
KEEP WARM
EXIT
DESCALE
SOUND
SETTINGS
COLD BREW
MYBREW
POUROVER
STRONG
BLOOM TIME
BLOOM VOL.
BREW TEMP.
FLOW RATE
CUSTOMIZE
CARAFE LID
REMOVE
FILL
AUTO START
TANK!
TIME SINCE BREW
MIN
HEATING BLOOMINGBREWING
AM
PM
HR
MAX
AT
NEW FILTER
KEEP WARM will be activated automatically for
brew volumes above 450 mls.
KEEP WARM can be switched o by navigating
the SETTINGS menu to KEEP WARM then
rotate and press SELECT dial to set ON or OFF.
Keep warm will not engage on cold brew mode
or pour over mode.
CAUTION
The bottom of the carafe is hot to touch for several
minutes after brewing. Use caution and ensure not
to set the carafe on a heat sensitive surface.
CAUTION
Do not place the thermal carafe on the heater plate
when KEEP WARM is activated. It will damage the
insulation.
WARNING
Do not place pour over kit / box on heater plate
when hot.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sage BDC400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sage BDC400 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 6,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info