733430
9
Zoom out
Zoom in
Previous page
1/44
Next page
7
NOTE: Use unleaded 91 or higher petrol only.
Do not mix lubricant with petrol.
FUEL FILTER
The fuel supplied to the engine is passed
through a lter to remove any contaminants
from entering the engine. Contaminants in the
fuel can cause poor performance and damage
to the engine.
The fuel lter is a non-serviceable item and, if
needed, should be replaced by an authorised
service centre.
STARTING/STOPPING THE ENGINE
See page 21.
WARNING
Do not run the high pressure cleaner
pump without water supply connected and
turned on, as this may damage the high
pressure seals and decrease the pump
life. Completely unwind the hose from its
reel or coil and make sure the hose is not
being restricted by tires, rocks, or any other
objects that may lessen or prevent water
flow to the high pressure cleaner.
WARNING
If the engine does not start after each pull,
squeeze the trigger to relieve water pressure
before attempting to start the engine again.
WARNING
Hold the handle and wand securely with
both hands. Expect the trigger handle
to move when the trigger is pulled due to
reaction forces. Failure to do so could cause
loss of control and injury to yourself and
others.
WARNING
While operating and storing, keep at least
1m (3 feet) of clearance on all sides of
the product, including overhead. Allow a
minimum of 30 minutes of “cool down” time
before storage. Heat created by mufer and
exhaust gases may be hot enough to cause
serious burns and/or ignite combustible
objects.
INSTALLING/REMOVING NOZZLES
See page 23 - 30.
WARNING
Never change nozzles or spray patterns
without locking the lock out on the trigger
handle. Never point the wand to yourself or
other persons. The quick-connect feature
contains small springs that could eject the
nozzle with some force. Failure to heed this
warning could cause personal injury.
USING THE SPRAY NOZZLE AND SOAP
NOZZLE
See pages 23 - 30.
For the most effective cleaning, the spray
nozzle should be between 200 mm (8 in.)
and 600 mm (24 in.) from the surface to be
cleaned. If the spray is too close it can damage
the cleaning surface.
Nozzle Application
0
o
Spot cleaning of high, hard-to-
reach areas
Removing caked-on mud from
heavy construction, farm, or
lawn equipment
Cleaning tar, glue, or stubborn
stains from concrete
Cleaning overhead areas
Removing rust from steel and
oxidation from aluminum
25
o
For general purpose or large
surfaces
General cleaning of dirt, mud,
and grime
Cleaning roofs, gutters, and
downspouts
Removing light mildew stains
Removing algae and bacteria
build-up from pools
Rinsing surfaces in
preparation for painting
40
o
For wide-angle rinsing
Light cleaning and washing
Washing and rinsing of
painted surfaces and boats
Cleaning roofs, windows,
patios, and driveways
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ryobi RPW3200Y at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ryobi RPW3200Y in the language / languages: English as an attachment in your email.

The manual is 10,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info