733430
7
Zoom out
Zoom in
Previous page
1/44
Next page
5
NOZZLE KIT
Soap nozzle, 0 DEG, 25 DEG, and 40 DEG
spray nozzle.
FUEL TANK
This fuel tank has a maximum capacity of 1.2L
(0.32 US gal). Use unleaded automotive fuel
in the engine.
FUEL VALVE
The fuel valve must be open to start the
engine and should always be closed before
storing the machine.
HOSE STORAGE
Once the high pressure hose is rolled, hang
it on the back of the machine using the hook-
and-loop strap to secure in place.
ON/OFF SWITCH
The on/off switch is used in combination with
the starter grip and rope to start the engine. It
is also used to turn the engine off.
STARTER GRIP WITH ROPE
The starter grip with rope is pulled to start the
machine.
SPARK ARRESTOR
This engine is factory equipped with a spark
arrestor. In some areas it is illegal to operate
an engine without a spark arrestor.
THERMAL RELIEF VALVE
This pump feature will prevent water
temperatures from reaching harmful levels by
releasing a small amount of water. Once the
water has drained, the thermal relief valve will
reset itself.
TRIGGER HANDLE
The trigger handle has a gripping surface that
provides added control of the spray wand and
helps reduce fatigue.
TRIGGER WITH LOCK OUT
Squeezing the trigger releases a stream of
water for high pressure cleaning. The lock out
provides protection against unauthorised use.
ASSEMBLY
UNPACKING
The product requires assembly. Carefully
remove the product and the accessories from
the box. Make sure that all items listed in the
"What's in the box" section are included.
WARNING
Do not use the product if any parts in the
"What's in the box" section are already
assembled to your product when you unpack
it. The parts on the list are not assembled to
the product by the manufacturer and require
customer installation. Use of a product that
may have been improperly assembled could
result in serious personal injury.
NOTE: The product is heavy. To avoid back
injury, lift the product with your legs, not with
your back, and get help when needed.
Inspect the product carefully to make sure
no breakage or damage occurred during
shipment.
Do not discard the packing material
until you have carefully inspected and
satisfactorily operated the product.
WHAT'S IN THE BOX
See page 14.
High pressure cleaner x 1
Trigger handle x 1
Nozzle kit x 1
Spray wand x 1
Trigger handle holder x 1
Spray wand holder x 1
Hose storage x 1
Screw (1/4-20 x 2.1 in., Phillips head) x 1
Screw (1/4-20 x 1.85 in., Phillips head) x 2
Hex nut (1/4-20 in.) x 3
Flat washer x 1
High-pressure hose 10.6 m (35 ft.) x 1
Operator’s manual x 1
TOOLS NEEDED
The following tools are not included in the
package but are needed for the assembly:
7/16 in. wrench
Phillips head screwdriver
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ryobi RPW3200Y at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ryobi RPW3200Y in the language / languages: English as an attachment in your email.

The manual is 10,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info