714329
29
Zoom out
Zoom in
Previous page
1/40
Next page
29
C. Making bags of foil rolls
Unwind the desired length of the roll and cut it by means
of the enclosed foil cutter (19). Now, seal one of the open
edges of the foil.
Connect the appliance to the mains and open the upper part
of the casing completely.
Position the foil with the flat surface downwards in front of
the appliance and place one of the open foil edges so on the
rubber lip (16) that this open foil edge touches the outside
of the sealing of the vacuum chamber.
Close the upper part of the casing.
Press the two locking buttons (6) at the front side of the
upper part with your thumbs in order to engage them in the
intended holding fixtures (13).
The appliance is put into operation via the integrated
contact switch (9) and the fully automatic vacuum-sealing
process is started.
1. The pump extracts air from the vacuum chamber (15) so
that a vacuum is generated. The vacuum is important for a
stable sealing seam.
2. After the air has been extracted, the bag is sealed.
This is indicated by the pilot lamp (3) illuminating red.
The pump is still in operation.
NOTE: The foil must not reach into the vacuum
chamber (15) or lie on the sealing of the vacuum
chamber (8 + 14).
NOTE: We recommend making a 2. sealing seam above the 1. manually set seam when using the
function “MAN SEAL“ in order to ensure a safe sealing.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher VAC155 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher VAC155 in the language / languages: English, German as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info