714329
28
Zoom out
Zoom in
Previous page
1/40
Next page
28
Close the upper part of the casing.
Press the two locking buttons (6) at the front side of the
upper part with your thumbs in order to engage them in the
intended holding fixtures (13).
The appliance is put into operation via the integrated
contact switch (9) and the fully automatic vacuum-sealing
process is started.
If the desired amount of air is extracted, continue as follows:
1. Press the upper part of the casing firmly down at the
outer edges with both hands.
2. Now, press the button “MAN SEAL“ (4) with the right
thumb or forefinger.
3. The pump stops and the appliance begins to seal.
The pilot lamp (3) glows red.
4. After sealing, the sealing seam has to cool down. The pilot
lamp (3) blinks red.
5. The vacuum-sealing process is finished when the pilot
lamp (3) extinguishes.
Press the manual cover valve (1), to ventilate the vacuum chamber (15).
Open the upper part of the casing and remove the bag.
Make sure that the sealing seam is in proper form. A correct seam has to be a flat, even stripe without
wrinkles and not showing any structure.
In case of an improper sealing seam refer to the advices under point “Trouble shooting”.
Always pull the mains plug after use.
NOTE: The upper part of the casing must be pressed
down for the whole vacuuming process so that there is
enough pressure on the sealing seam.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher VAC155 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher VAC155 in the language / languages: English, German as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info