714032
23
Zoom out
Zoom in
Previous page
1/36
Next page
23
Operating the appliance
The appliance is designed for a max. continuous operating
time of 5 minutes. After this time, the appliance has to cool
down for at least 5 minutes. If this is not observed, the pump
might be damaged!
Important notes for handling the appliance
Always clean the appliance after each use following our cleaning procedures – failure to do so can
result in a clogged Food Designer.
Follow these instructions to create your own recipes using a variety of ingredients.
Never wash the appliance under running water or in a dishwasher.
Never pour gelling salt or any product containing calcium into the filling funnel of your PERLINO – as it
comes to gelling inside the appliance by getting in contact with gelling starch. As a result, the appliance
may be clogged and may stop functioning.
Do not drop the appliance into the gelling bath or any calcium chloride solution. In this case, remove
the protective cap and the nozzle and wash them thoroughly under clean water. Carefully clean the
housing by wiping it with a damp, lint-free cloth; wipe dry if necessary.
Do not operate the appliance without the protective cap, as this protects the nozzle to get into
contact with the gelling bath (consisting of calcium chloride. In addition, the appliance can be
conveniently placed on the protective cap without the nozzle having contact with the table, worktop, etc.
Selection of the appropriate nozzle
The individual ingredients, their consistency and your personal taste decide on how big the jelly pearls
should be. Take our recommendations as a basis and try it yourself until you have found the individually
fitting size.
Nozzle Recommended use
small
For about 3 mm small jelly pearls e.g. made of juices, syrups, tea, coffee and intensively
flavourful ingredients such as spicy sauces.
big
For about 5 mm jelly pearls, suitable for very finely puréed ingredients as well as
nectar, fruit or vegetable creations.
Preparing the appliance for use
For a start, please clean the appliance as well as all accessories. For more information, please refer to
chapter “Cleaning and maintenance”.
Remove the protective cap from the bottom of the appliance.
Select one of the two nozzles (see "Selection of the appropriate nozzle").
Screw the selected nozzle firmly into the outlet thread at the bottom opening of the appliance.
Put the protective cap onto the bottom of the appliance again.
Connecting the appliance to the power supply
Insert the connector plug into the plug-in point on the back of the appliance.
Connect the plug-in power supply with an adequately protected power socket.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher FD500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher FD500 in the language / languages: English, German as an attachment in your email.

The manual is 2,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info