714006

Rommelsbacher CT3403TC Manual

18
Zoom out
Zoom in
Previous page
1/24
Next page
18
MINUS-/PLUS sensors
The sensors MINUS and PLUS are for setting the desired cooking level as well as for
activating the automatic cooking system.
Switching a cooking zone on (cooking)
By quickly applying the MINUS or PLUS sensor after switch-on, the respective cooking zone will be
activated.
Setting a cooking level
When applying the PLUS sensor for the first time, the appliance starts with setting 1. By further applying
the PLUS sensor, the level can be increased to 9.
When applying the MINUS sensor for the first time, the appliance starts with setting 9. By further applying
the MINUS sensor, the level can be reduced to 1.
When continuously applying one of the two sensors, the indication changes in the rhythm of 0.5 seconds.
When continuously applying the PLUS sensor, the cooking level remains at the highest setting and when
continuously applying the MINUS sensor, it remains at cooking level “0” (end stop). Only by shortly
releasing the respective sensor and applying it anew, this end stop is passed. For example, this is necessary
for activating the automatic cooking system.
Automatic cooking system
Every cooking zone features an automatic cooking system: After activation of the cooking zone, it will be
heated for the period of a pre-programmed cooking time at max. power level (100 %). This allows for an
especially quick heating of your food and thus, helps to save time and energy. The period of the automatic
cooking system depends on the chosen cooking level (see chart under point “Cooking level parameters”).
Activating the automatic cooking system
The automatic cooking system of a cooking zone is activated by selecting the cooking level
via the MINUS sensor downwards and by switching via “0” to “9” or further down (e. g. to
level “5”). Now, a point glows in the cooking level display additionally on the right beside
the figure. This point indicates that the automatic cooking system is active for this cooking
level. The point goes out as soon as the time of the automatic cooking system has elapsed.
Then, the cooking zone keeps heating at the set level (e. g. “5”).
Quitting the automatic cooking system
The automatic cooking system can be quit any time by setting the cooking zone to level “0”. Afterwards,
the desired cooking level without automatic cooking system can be selected via the PLUS sensor.
Automatic temperature control
The cooking zones feature an automatic temperature control, i. e. the set temperatures are kept constantly
through a correspondingly cycled energy supply. This can be observed by the heating zones turning on and
off. You will find the corresponding values for each cooking level in the chart under point “Cooking level
parameters”.
Please use the following settings
1 ... 3 for heating-up
4 ... 6 for steaming, stewing, boiling
7 ... 9 for parboiling, baking, roasting
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher CT3403TC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher CT3403TC in the language / languages: English, German as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info