714272
21
Zoom out
Zoom in
Previous page
1/28
Next page
21
If the temperature of the cooking zone has reached a value below 60 °C due to
the waste heat emitted by the pot, the display shows “-L-”.
Pot recognition
The appliance recognizes whether there is a suitable cookware on the cooking zone. A proper regulation is
only possible if the cookware covers the related scanning area in the middle of the cooking surface.
If no suitable cookware is recognized on the cooking zone after switch-on, the
display will show “---” and an alternate warning signal will sound. If a pot is
re-placed within 15 seconds, the cooking process will continue with the level
last set and an operating time that might have been set before will continue
to run. However, if no pot is recognized within 15 seconds, the appliance will
switch automatically into the standby mode.
Cooling
After switch-on an inside fan starts working, which cools the interior parts of the appliance in order to
prevent the appliance from overheating.
It is normal for the fan to continue running in the standby mode after a long operation time.
Operating time restriction
The operating time restriction will cause the cooktop to switch automatically in the standby mode if the
settings have not been changed for a period of 2 hours. This happens independently of the respectively
set level. After an automatic switch-off the cooking plate can be turned on once again and the maximum
operating time will be active again.
In case the operating time (timer) is set for a period of more than 2 hours, this setting takes priority. The
appliance switches off automatically after the set time has elapsed.
Priority regulation
Although any other touch key (also LOCK) is still activated, the appliance may be brought to the standby
mode at any time during operation by touching the main switch touch key.
Prior to initial use
Wipe the appliance prior to the initial use with a damp cloth and dry it thoroughly. For more detailed
information please refer to “Cleaning and maintenance”.
Operating the appliance
1. Standby mode
Connect the mains plug to an appropriately fused power socket.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher CT2100IN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher CT2100IN in the language / languages: English, German as an attachment in your email.

The manual is 1,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info