708878
57
Zoom out
Zoom in
Previous page
1/76
Next page
57
Connecting External Devices
If You’re Using MIDI
About MIDI
MIDI stands for “Musical Instrument Digital Interface,” and
is a unified standard for the exchange of performance data
and other information between electronic instruments and
computers.
The AT-10S is equipped with MIDI connectors and a
Computer connector to let it exchange performance infor-
mation with external devices. These connectors can be used
to connect the AT-10S to an external device for even greater
versatility.
About MIDI Connectors
The AT-10S has two kinds of MIDI connectors.
Connecting these to the MIDI connectors on a MIDI
instrument makes it possible for the two instruments to
control each other.
For instance, you can output sound from the other
instrument or switch tones on the other instrument.
You should also set the MIDI send channel as needed.
MIDI Out Connector
Only the notes played on the keyboard, movements of the
Damper pedal and Expression data will be transmitted to the
external MIDI connector.
MIDI In Connector
Performance messages from an external MIDI device are
received here.
These incoming messages may instruct the receiving MIDI
instrument to play sounds or switch tones.
The AT-10S contains two sound generators: one sound
generator for its own keyboards and one GS sound generator
(p. 67). Normally, musical data transmitted from an external
device to the MIDI In connector is sent to the GS sound
generator.
Connecting the AT-10S to a
MIDI Instrument
1. Turn off the AT-10S.
2. Set the Computer switch on the rear of the AT-
10S to “MIDI.”
* When the AT-10S is powered up, the setting doesn’t change
until the power is reset, even if the computer switch is operated.
3. Use a MIDI cable (sold separately) to connect
the MIDI connector on the external instrument
to the MIDI connector on the AT-10S.
4. Turn on the external MIDI device and AT-10S.
5. You should also set the MIDI send channel as
needed.
Connection Example:
Connecting the MIDI Device
984
Computer
PC-1
PC-2
Mac
MIDI
Out In
MIDI
AT-10S
External MIDI Instrument
MIDI
Out
In
RL (Mono)
OutputPedal
Stereo
Computer
PC-1
PC-2
Mac
MIDI
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland AT-10S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland AT-10S in the language / languages: English as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info