708878
56
Zoom out
Zoom in
Previous page
1/76
Next page
56
Connecting External Devices
Connecting a Computer
The AT-10S provides a Computer connector. By connecting
this to the serial port of your computer, you can transmit and
receive musical data. Since the AT-10S is able to save musical
data in SMF format, you can use your computer to edit the
musical data.
1. Turn off the AT-10S and the computer.
2. Use a computer cable (sold separately) to con-
nect the Computer connector on the AT-10S to
a serial port on the computer.
3. Set the Computer switch on the rear of the unit
to match the type of connected computer.
Take a look at the Connection Examples.
4. Turn on the computer.
5. Turn on the AT-10S.
6. Make the settings for baud rate (transmission
speed) for the computer and the software.
For more information, refer to the documentation for the
computer you are using.
7. You should also make the settings for the MIDI
send channel (p. 54).
Connection Examples:
Connection with an Apple Macintosh computer
Use a computer cable (sold separately) to connect the
Computer connector on the AT-10S to the modem port (or
printer port) on the Apple Macintosh. Set the Computer
switch to “Mac.”
Use “PatchBay” on the Apple Macintosh to set the interface
type (the clock speed for the MIDI interface) to “1 MHz.”
Connection with an IBM PC
Use a computer cable (sold separately) to connect the
Computer connector on the AT-10S to the COM1 or COM2
serial port on the IBM PC. Set the Computer switch to “PC-
2.”
Computer
PC-1
PC-2
Mac
MIDI
Computer
PC-1
PC-2
Mac
MIDI
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland AT-10S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland AT-10S in the language / languages: English as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info