708878
55
Zoom out
Zoom in
Previous page
1/76
Next page
55
Connecting External Devices
If you want to hook up an external instrument to the AT-10S,
then this chapter is for you.
Names and Functions of
Jacks and Connectors
1 MIDI Out/In Connectors
You can connect external MIDI instruments to these
connectors to exchange performance information.
2 Output L (mono)/R Jacks
You can some awesome sounds if you connect speakers or
other audio equipment to these jacks. You can also hook up a
portable stereo to record your performances on cassette tape.
3 Computer Connector
You can connect a computer to this connector to exchange
performance information.
4 Computer Switch
Set this switch to Mac, PC-1, or PC-2 according to the type
computer that’s connected.
You can also switch between connections to the MIDI Out/In
connectors and the Computer connector.
5 Pedal Connector
6 AC Inlet
Making the Connections
* If you’re planning on connecting the AT-10S to other
equipment with cables, be sure to follow the steps shown below
to make the connections. By turning on or off devices in the
wrong order, you risk causing malfunction and/or damage to
speakers and other devices.
1. Turn down the volume all the way on all equip-
ment.
2. Turn off the power to the AT-10S and other con-
nected equipment.
3. Connect the AT-10S and other equipment with
the cables.
4. Turn on the connected equipment.
5. Turn on the AT-10S.
6. Adjust the volume.
After use, follow the steps below to switch off the power.
1. Turn down the volume all the way on all equip-
ment.
2. Turn off the AT-10S.
3. Turn off the connected equipment.
Connecting Audio Equipment
You can hook up a tape recorder or other audio device and
record your performances on the AT-10S. Use an audio cable
to connect the input jack on the audio set or amp mixer to
one of the output jacks on the AT-10S. Use an audio cable
with a standard plug. When purchasing an audio cable,
please consult the vendor where you bought the AT-10S.
5 2 3 4 1 6
MIDI
Out
In
AC
RL (Mono)
OutputPedal
Stereo
Computer
PC-1
PC-2
Mac
MIDI
RL (Mono)
Output
Stereo
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland AT-10S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland AT-10S in the language / languages: English as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info