708878
58
Zoom out
Zoom in
Previous page
1/76
Next page
58
Troubleshooting
When you press the [Power] switch, the power
doesn’t come on.
Power cord is not connected correctly (p. 14).
No sound is heard.
The [Master Volume] knob is set too low (p. 14).
Headphones are connected (p. 15).
When you connect the headphones, the sound is heard
only through the headphones.
The volume of each Part Balance button is set too low (p.
23).
The volume is set too low on the Expression Pedal (p. 32).
You do not have a voice selected (p. 20).
Voices that have their button indicator lit can be played.
No sound is heard (when a MIDI instrument is
connected).
The power of the connected external devices is not turned
on (p. 57).
The Computer switch on the rear of the unit is not set to
“MIDI” (p. 57).
Expression Pedal does not operate
The Expression Pedal will not function while playing
back performance data (SMF music data) from a device
other than the Atelier series.
The function of the Expression Pedal during recording (p.
51) or the function during playback (p. 52) has been set to
“COMPOSER.”
When the Human Voice “Jazz Scat” is selected,
playing dynamics do not change the sound
The Utility menu item “Initial Touch” is turned OFF (p.
48).
Rotary effect is not be applied.
Some sounds do not allow the rotary effect to be applied
(p. 30, p. 62).
Even though you press only one key, a multiple
number of notes sound.
Harmony Intelligence is at ON (p. 28).
Chord Intelligence is turned ON.
When you press the [One Touch Program] button,
lighting its indicator, the Chord Intelligence function is
turned on. When you use the Chord Intelligence function,
you can sound a chord by pressing only some of the notes
that make up the chord, without having to press all notes
of that chord in the Lower keyboard.
Automatic Accompaniment sounds odd
The keys for a chord were not pressed simultaneously.
When performance data from a device other than the AT-
10S is being played together with the Automatic Accom-
paniment, the Automatic Accompaniment may
not be sounded correctly.
Rhythm sounds odd
When performance data from a device other than the AT-
10S is being played together with the Automatic Accom-
paniment, the Rhythm performance may not be sounded
correctly.
Pitch is off.
Transpose is in effect (p. 31, p. 49).
The tuning is incorrect (p. 54).
Performance data cannot be played back
While the Function menu appears in the display (with the
exception of Channel Mute and Play Transpose),
playback is not allowed. If you wish to playback perfor-
mance data, press the [Function] button once again to exit
the Function menu (p. 48).
Recording is not possible
While the Function menu appears in the display (with the
exception of Channel Mute and Play Transpose),
recording is not allowed. If you wish to record perfor-
mance data, press the [Function] button once again to exit
the Function menu (p. 48).
Lyrics are not indicated properly in the display
With some music files, the lyrics cannot be displayed
correctly.
If you press a button while the lyrics are being shown in
the display, the lyrics will disappear. To recall them,
press the [Play] button.
The recorded performance has disappeared
Any performance that has been recorded is deleted when
the power to the unit is turned off. A performance cannot
be restored once it’s been deleted, so be sure to save it on
a floppy disk before you turn off the power (p. 43).
The bass note of the Automatic Accompaniment
does not sound
When a voice is selected for the Pedal Bass part, the bass
of the Automatic Accompaniment will not sound.
When you started a Rhythm with an Intro, the
Rhythm did not sound
Some Rhythms do not have rhythm sounds in the intro.
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland AT-10S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland AT-10S in the language / languages: English as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info