602239
14
Zoom out
Zoom in
Previous page
1/28
Next page
EQ Setup
14
Level & Delay
Level
The level for each channel of the 3Sixty.3 can be attenuated up to -40dB by either entering a specific value in the text box above the level slider or moving
the level slider with the mouse. This feature can be used to; reduce the output voltage for amplifiers that have a maximum input voltage that is less than 8V,
adjust the balance or fade, or to level set a source. Located below the level slider is a check box for muting output channels. To mute a channel, select the
speaker (channel) from the “Speaker Selection”.
NOTE: After configuring the 3Sixty.3’s input, the output from each channel will be 8VRMS with 0dB of attenuation.
Delay
Each channel of the 3Sixty.3 can be delayed by up to 10 msec, by either entering a specific value in the text box above the level slider or moving the level
slider with the mouse. The delay can be entered in distance or time (See Preferences).
NOTE: The Crossover Link does NOT link the left and right stereo pair delay like it does to the other crossover settings. Each channels delay remains
independent and must be adjusted as such.
31 Band EQ Adjustments
The 3Sixty.3’s 31 band parametric EQ has five main adjustments used to adjust the outputs frequency response; Band, Frequency, Q, Gain, and Polarity.
There is also three master resets that can be used to return each main EQ adjustment back to default. In addition to the four main adjustments there are two
check boxes located below the Delay and Level sliders for inverting the phase or muting the selected channel(s).
Band
Each channel of the 3Sixty.3 has a variable 31 band EQ. An individual band can be selected by either entering the desired band number in the EQ band text
box or by select the bands gain slider. The default frequency for each band is set to 1/3 octave increments, however each band’s frequency can be changed
to any desired frequency.
Frequency
Each band of the EQ has a variable frequency that the user can change from the default value. Select the desired band you would like to change the
frequency of and enter the desired frequency into the frequency text box or moving the slider to the desired frequency.
Q
Each band of the EQ has a variable Q that the user can change from 0.1 to 6. To change the Q of a specific band, select the desired band you would like to
change and enter the desired Q into the Q text box or moving the “Q” slider to the desired value.
Gain
Each band of the EQ has a variable gain that the user can adjust the level from -24dB to +24dB. To change the level of a specific band, select the desired
band you would like to change and enter the desired level into the “Gain” text box or moving the gain slider to the desired value..
Polarity
Located under the “Delay” slider the “Invert” check box can be used to reverse the polarity of the channel.
Wired Remote Control (WRC) Simulator
When connecting the 3Sixty.3 processor to a PC the Wired Remote Control is
disabled and the WRC simulator at the top of the UI assumes control of the WRC
functions. To open the WRC simulator, double click the WRC illustration in at the top
of the UI. The WRC simulator window will open and display two drop down menus
and two level sliders. The drop down menus control the input source (left) and the EQ
preset (right). The two sliders control the master volume (left) and sub level (right).
NOTE When switching the source to Bluetooth, audio must be streaming from
your device before selecting the Bluetooth as the source.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rockford Fosgate 3 SIXTY.3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rockford Fosgate 3 SIXTY.3 in the language / languages: English as an attachment in your email.

The manual is 6,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Rockford Fosgate 3 SIXTY.3

Rockford Fosgate 3 SIXTY.3 User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info