The preferences menu is used to set up the general settings of the processor, remote control, and
bluetooth dongle.
General
a)The General menu allows you to select the EQ Delay Units to be displayed in ft, in, m, or cm
b)The General menu also allows you select the Remote Output Delay Timing. 1 sec, 2 sec, 4 sec, or 8
sec. This allows the user to customise the time delay from when the 3Sixty.3 initializes (turns on) to
when it turns on any external amplifiers connected to its REM OUT (blue wire in 4 pin power harness)
This allows the user to ensure that the source unit, and 3Sixty.3 are on and initialized before turning
on the amplifiers, therefore eliminating any turn on “pop” noise.
Remote
a)The Remote menu allows you to select the Mounting Orientation of the wired remote control to be either normal or inverted.
b)The Remote menu also allows you to select the function for each knob. There are three options for two knobs; Master Volume, Sub Volume, and Punch
EQ. You cannot however have both knobs perform the same function.
Bluetooth
a) The Remote menu allows you to name your BT dongle.
b) The Remote menu allows you to configure a PIN number security password that will be required before your hands free device can sync to your 3Sixty.3.
c) The Remote menu also allows you to enable or disable “Auto Play” by checking the selection box. The “Auto Play” feature automatically switches your
input source to BT when your BT device sends a notification or is playing music.
NOTE: The factory default pin number is set to (0000).
NOTE: When “Auto Play is enabled there is a 7sec delay when switching from BT
to any other source on output channels 5,6,7, & 8.
Main UI Screen.
The 3Sixty.3’s main page can be broken down into four main sections, Speaker
Selection, EQ Graph, EQ Controls, and WRC simulator. It is also used to display the
current preset that is loaded, device connection status, and software update status.
Speaker Selection
The upper left of the UI displays a picture of a vehicle with the speakers (channels)
displayed that were initialized in the Assign Input/Output section of the initial
configuration. Each speaker (channel) can be configured individually or you can link
together channels using the check boxes to the right of the vehicle illustration. For convenience the
sub woofer channels just have one check box to link the level, crossover, and EQ. By selecting to link
the left and right channel level, crossover, or EQ together what you do with one side will be duplicated
to the other side. The speaker (channel) that is selected will be highlighted blue and the channels
name will be displayed above the vehicle diagram.
NOTE: If the speakers represented in the vehicle speaker selection display do not represent the
speakers in your vehicle you will need to configure the Assign Input/Output section of the
initial configuration.
NOTE: If the “Auto Normalize” function was used during configuration, each channel has its own
EQ correct curve. If you choose to link the EQ for multiple channels the EQ curve of the
selected channel will be copied to all the other linked channels.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Rockford Fosgate 3 SIXTY.3 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Rockford Fosgate 3 SIXTY.3 in the language / languages: English as an attachment in your email.
The manual is 6,77 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
