1. Select the “File” tab in the upper left hand corner, The file menu has five sub menus; Save File, Save File As, Load File, Import 360 File, and Exit.
Save File
This allows you to quickly save a file that has previously been saved.
Save File As
This allows you to save a file, but requires you to enter a file name and location to be
saved.
Load File
This allows you to load a previously saved 3Sixty.3 file (.3cf) to a 3Sixty.3 processor.
Import 360 File
The 3Sixty.3 is backwards compatible. This allows you to load a previously saved
3Sixty.1 or 3Sixty.2 file (.360) to a 3Sixty.3 processor.
NOTE: The input and output configuration must be the same as your original
system configuration.
Exit
This closes the UI.
Device Tab
Select the “Device” tab in the upper left hand corner, The Device menu has five
sub menus; Configuration, Load Presets, Store Presets, Upgrade Firmware, and
Preferences.
Configuration
The Configuration menu is used to set up the assign input/output configuration,
input summing, assign source presets, input level set, and denormalization of a
high level input, of the 3Sixty.3 processor.
NOTE: The system will automatically mute all outputs as soon as you enter the configuration setup and unmute all outputs as soon as you close the
configuration setup.
Assign Input / Output Configuration
The 3Sixty.3 can handle up to 8 channels of input and 8 channels of output. In the Assign Input Configuration page there are three possible input sources
available from the “Source Interface” tab; Low Level (RCA), High Level (Speaker), Optical (Toslink). The input and output channels can be assigned in any
configuration/combination. The labeling of the inputs and outputs on the 3Sixty.3 end panels is simply a guide for the most common system found in
vehicles.
Input Summing
The 3Sixty.3 can take two or more non full range, high level signals and combine them to make one full range low level signal. When the “Source Interface”
tab in the previous step in the “Assign Input” window is set to “High Level (Speaker)” you are given the opportunity to select an output channel from the
diagram and select which inputs you would like to sum for that output channel. (Patent # US 7,778,718 B2)
NOTE: You must assign at least one input channel for each output channel.
Assign Source Presets
The 3Sixty.3 can save up to four separate EQ settings (Presets). The four presets can be setup so that each source can have a dedicated EQ setting or so
that each source can run multiple EQ settings.
NOTE: Any source that does not have a preset assigned to it will be disabled. The remote will skip any unused sources and presets during selection
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Rockford Fosgate 3 SIXTY.3 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Rockford Fosgate 3 SIXTY.3 in the language / languages: English as an attachment in your email.
The manual is 6,77 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
