The upper right of the UI displays the EQ graphically for the channel(s) selected. The EQ graph will start with a perfectly flat response (20-20KHz) when first
setting up your equalizer, then any changes/additions to the 31 band EQ, filters, or Q, will be displayed in the EQ graph.
NOTE: The EQ graph will not
display a perfectly flat
response when first tuning
a vehicle if the “Auto
Normalize” function was
used during configuration.
Instead you will see the
corrections the “Auto
Normalize” made to the
31 Band EQ to flatten the
selected channel(s) its
response.
EQ Controls
The lower half of the UI is used to control the 3Sixty.3 processor’s 31 parametric band EQ. Every channel has its own independent (unless linked) EQ
adjustments. The EQ adjustments can be broken down into three separate sections Crossover Network(s), Level & Delay, and the 31 Band EQ Adjustments.
Crossover Network(s)
The crossover adjustments consist of three parts; Crossover Type, Crossover Class, and Crossover Slope.
Crossover Type
The crossover type for each channel can be configured as either high-pass (HPF), low-pass (LPF), band-pass (BPF), low-shelf (LSF), high-shelf (HSF) or
completely by-passed (AP). After selecting the crossover type, you will need to enter the frequency(s) you would like your filter(s) to cutoff at. Below the
crossover slope selection tab there is a box for entering high filter values and low filter values depending on the crossover type you previously selected.
Crossover Class
The crossover class for each channel can be configured as either Linkwitz (Q=0.49), Bessel (Q=0.58), Butterworth (Q=0.707), or Chebychev (Q=1.0). If you
are not sure which class to use we recommend starting with a Butterworth filter because of its flat response characteristics.
Crossover Slope
The crossover slope for each channel can be configured as either 12dB/octave, 24dB/octave. 36dB/octave, 48dB/octave The steeper then slope, the faster
the roll-off, resulting in less content passing through the device from the unwanted frequency range.
NOTE: If you are unsure as to the correct setting, consult your local Authorized Rockford Fosgate dealer for correct recommended setting for your
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Rockford Fosgate 3 SIXTY.3 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Rockford Fosgate 3 SIXTY.3 in the language / languages: English as an attachment in your email.
The manual is 6,77 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
