6. On the Assign Source Presets page, the four presets can be configured so that each source can
have a dedicated EQ preset or so that each source can run multiple EQ presets that the user can
select from. The four sources on the left side of the table are in the order that they are displayed in
on the WRC LED’s To assign a preset to a source, select the check box under the preset number you
would like to add to that source.
NOTE: Any source that does not have a preset assigned to it will be disabled. The remote will
skip any unused sources and presets during selection mode.
7. On the level setting CD track prompt, insert the 3Sixty.3 setup disk into your source unit, select
track one and turn your volume to maximum.
NOTE: The outputs of the 3Sixty.3 are muted internally during this step to ensure the speakers are
not damaged.
8. The level meters are now displayed for each output channel. The level meters are displayed in two different colors red and green. If all of the meters are
green move onto the next step. If the level meters are not all green, slowly reduce the source unit’s volume until all the level indicators are green. Note the
final source volume on the source unit level, which is the MAXIMUM level the source unit should be turned up to once the installation is complete and
move to the next step.
NOTE: The 3Sixty.3 utilizes a very unique
circuit to detect the maximum
output voltage that can be achieved
from each channel of
your source unit at a
very low THD level. THE 3Sixty.3
IS NOT LOOKING FOR A
CLIPPED SIGNAL FROM YOUR
SOURCE UNIT.
9. Select the “Auto Range” button to set up the input to the DSP. This may take up to 1 min, then
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Rockford Fosgate 3 SIXTY.3 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Rockford Fosgate 3 SIXTY.3 in the language / languages: English as an attachment in your email.
The manual is 6,77 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
