625561
23
Zoom out
Zoom in
Previous page
1/46
Next page
22 V0913 NX SERIES
English
check the rotation direction of the motors. This test can only be done on the motor of the spindle
at 3000 R.P.M. The rotation direction of the motor has to be, seen from above, anticlockwise. If
the rotation direction of the spindle is not correct, the wires L1 and L2 must be exchanged. If this
direction is correct, all other motors have the right rotation direction.
Fig.4 Fig.5
Warning:
The rotation direction can never be tested on the saw motor. The saw spindle has a left screw
thread so that the saw blade can loosen if the rotation direction is incorrect.
Observation:
1 When starting a single phase machine, the start button has to be turned until the machine runs
at full speed. As long as the start button is turned, the starting capacitor of the machine stays
connected and will get damaged.
2 The motors are secured against overloading. If the motor is turned off because of this protection,
you need to wait until the machine has cooled down, before starting it up again.
3 When starting a three phase machine, simply push the green start button.
Fig.6
1 Single phase starter switch
2 Start button
3 Stop button
4 Selector switch
5 Emergency stop button
6 Warning bulb brake release
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robland NXSD 310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robland NXSD 310 in the language / languages: English as an attachment in your email.

The manual is 1,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robland NXSD 310

Robland NXSD 310 User Manual - German - 100 pages

Robland NXSD 310 User Manual - Dutch - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info