625561
22
Zoom out
Zoom in
Previous page
1/46
Next page
NX SERIES V0913 21
English
Transportation (g. 1, 2 en 3)
Depending on the method of transport or shipping, you will receive the machine in a case or on
transport blocks. The packing itself, made of bre plates, and the wooden beams can easily be
recycled. Take the sides of the crates and remove the carton and the other parts fastened to the bottom
of the crate. Take the machine of the pallet by means of lever bands.
Self pick-up: for self pick-up, the assembled machine is securely mounted on transport blocks.
The table surfaces and all exposed parts are covered with a protective plastic lm.
Avoid any impact when unloading the machine and never pull on the worktables or aluminium sliding
table.
Machine on pallet: move the machine on level ground using a pallet jack as shown in the drawing.
Use a wooden ramp made of thick board and wooden beams, and secure the ramp to the pallet in
order to avoid slipping of the ramp.
Never try to move the machine on rollers when its on an incline.
Once the machine is on level ground, move it with a pallet jack, or forklift.
Fig. 1, 2, 3
ATTENTION:
Always make sure that the useful loading capacity is big enough. Place the lever bands in such a way
that they don’t put too much pressure on the tables. Lift the machine a few centimetres to remove the
bottom of the crate.
Start-up:
Always make sure the machine wasnt damaged during transport or whilst unloading. Place the
machine stable on a solid underground and make sure that there is enough space around the machine
to use it safely.
ATTENTION:
Working with woodworking machines in an unsafe way can be very dangerous. It is in your own
interest that you use all safety devices and protections.
Electrical connection (g. 4, 5 en 6)
The electrical connection must be carried out by a qualied electrician who is able to calculate exactly
the required wire section and amperage of the fuses.
check that the main voltage of your machine corresponds with the voltage in your workshop;
then open the electrical connection box at the back of the machine (g. 4);
connect the 3 phases to the terminals marked L1, L2, L3 (g.5);
if there is a neutral conductor (blue), it is connected to the terminal N;
connect the earth (green + yellow) to the terminal marked with the earth symbol;
check if the spindle runs freely before starting up the machine;
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robland NXSD 310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robland NXSD 310 in the language / languages: English as an attachment in your email.

The manual is 1,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robland NXSD 310

Robland NXSD 310 User Manual - German - 100 pages

Robland NXSD 310 User Manual - Dutch - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info