520097

Robbe Futaba FF-10 Manual

76
Zoom out
Zoom in
Previous page
1/119
Next page
76
GETTING STARTED WITH A BASIC 4-CHANNEL (Aileron/Flap/Rudder/Elevator) GLIDER
This guideline is intended to help you get acquainted with the radio, to give you a jump start on using your new radio,
and to give you some ideas and direction in how to do even more with this powerful system than you may have already
considered. It follows our basic format of all programming pages: a big picture overview of what we’re trying to
accomplish; a “by name” description of the steps to help acquaint you with the radio; and a step-by-step instruction to
leave out the mystery and challenge of setting up your model.
For additional details on utilizing each function, see that function’s section in this manual—the page numbers are indicated
in the fi rst column as a convenience to you.
GOAL of EXAMPLE: STEPS: INPUTS:
Prepare your aircraft. Install all servos, switches, receiver per your model’s instructions. Turn on
transmitter then receiver; adjust all linkages so surfaces are nearly centered.
Mechanically adjust all linkages to get as close as possible to proper control
throws and minimize binding prior to radio set up.
Check servo direction and throws.
Make notes now of what you will need to change during programming.
Select the proper
MODEL
TYPE
for your
model. (Ex:
GLID 1A+1F
.) See p. 78.
[NOTE: This is one of several functions
that requires confirmation to make a
change. Only critical changes such as
a
MODEL
RESET
require additional key
strokes to accept the change.]
In the
BASIC
menu, open the
PARAMETER
submenu.
Turn on the transmitter.
for 1 second.
(If
ADVANCE
, again.)
then
C
to highlight
PARAMETER
.
to choose
PARAMETER
.
Go to
MODEL
TYPE
.
C
to
MODEL
TYPE
.
Select proper
MODEL
TYPE
.
Ex:
GLID(1A+1F)
.
Confi rm the change.
Close the
PARAMETER
submenu.
to
GLID(1A+1F)
.
for 1 second.
Are you sure?
Displays.
to confi rm.
to return to
BASIC
menu.
NAME
the model.
P. 32.
(Note that you do not need to do
anything to "save" or store this data.)
In the
BASIC
menu, open the
MODEL
submenu.
C
as needed to highlight
MODEL
.
to choose
MODEL
.
Go to
MODEL NAME
.
C
to
NAME
.
(1
st
character of model’s name is highlighted.)
Input aircraft’s name.
Close the
MODEL
submenu when done.
to change fi rst character.
When proper character is displayed,
C
to move to next character and
repeat.
to return to
BASIC
menu.
REVERSE
servos as needed for proper
control operation.
P. 38.
In the
BASIC
menu, open (servo)
REVERSE
.
C
to
REVERSE
.
to choose
REVERSE
.
Choose desired servo and reverse its
direction of travel.
(Ex: reverserudder servo.)
C
to
CH4:RUDD
.
so
REV
is highlighted.
Are you sure?
Displays.
for 1 second.
Repeat as needed.
to return to
BASIC
menu.
… 76 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robbe Futaba FF-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robbe Futaba FF-10 in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robbe Futaba FF-10

Robbe Futaba FF-10 User Manual - German - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info