520097

Robbe Futaba FF-10 Manual

7
Zoom out
Zoom in
Previous page
1/119
Next page
7
A QUICK INTRODUCTION TO THE 10C SYSTEM
TRANSMITTER:
• Large graphic liquid-crystal display panel with 2 buttons, a cursor lever and an easy set up turn-and-press Dial for quick,
easy setup.
• All transmitters include all 3 aircraft types with specialized programming for each, including:
• Airplane (
ACRO
)
• V-tail • Twin Aileron Servos (
FLAPERON
and
AIL-DIFF
) • Gyro Mixing
•
ELEVON
• Twin Elevator Servos (
AILEVATOR
)
•
AIRBRAKE
• Snap Roll (4 separate directions available)
• Helicopter (8 swashplate types, including CCPM, see page 82)(
HELI
)
• 3 Idle Ups • Throttle and Pitch Curves per Condition
• Revo. Mixing • Gyro Mixing including Separate Settings per Condition
• Delay • Governor Mixing
• Sailplane/Glider (3 wing types)(
GLID 1AIL+1FLP
/
2AIL+1FLP
/
2AIL+2FLP
)
• V-tail • Twin Ailerons (
FLAPERON
and
AIL-DIFF
) • 5 Flight Conditions (Normal/Start/
•
ELEVON
• Crow (
BUTTERFLY
) Speed/Distance/Landing)
•
OFFSET
(5 conditions)
•
BASIC
menu for quick, easy set up of less complex models.
•
ADVANCE
menu for more complex, unique setups.
• Four electronic TRIM LEVERS for rapid yet precise trim adjustment - no remembering to “store trims” between models
and no more “bumped trims” during transport.
•
IDLE- DOWN
(
ACRO
),
THR-CUT
(
ACRO
/
HELI
) (engine shut off), and
MOTOR CUT
(
GLID
) setups to allow precise engine/motor
control for taxi and landings.
• 15 complete model memories with 4/16/33 more per optional CAMPac(-16K/64K/128K).
• New stick design with improved feel, adjustable length and tension.
• Triple rates available by setting dual rates to 3-position switches.
• Eight SWITCHES, 3 DIALS and 2 SLIDERS; completely assignable in most applications.
• Trainer system includes the “functional” (
FUNC
) setting, which allows the student to use the 10C’s mixing, helicopter, and
other programming functions even with a 4-channel buddy box. (Optional trainer cord required.)
• With a TP-FM module: transmits in both FM (
PPM
) and
PCM
by selecting modulation/cycling transmitter. Requires
receiver of proper modulation.
With a TM-10 2.4GHz module: transmits in both
2.4G-7CH
and
2.4G-10CH
by selecting modulation/cycling transmitter.
Requires receiver of proper modulation.
• Permanent memory storage via EEPROM with no backup battery to service or have fail.
• 10CA transmitter features airplane friendly switch layout, with the trainer switch at the left hand (Mode 2), and a notched
throttle to minimize throttle changes with rudder input. Defaults to
ACRO
model type.
• 10CH transmitter features helicopter
-friendly switch layout, with idle-up and throttle hold switches at the left hand, and a
smooth, ratchet-less (unsprung) throttle for perfect hovering. Defaults to
HELI
(
H-1
swashplate type) model type.
• Change transmitter mode from mode 2 to modes 1, 3, or 4. (See P. 17)
Note that in the text of this manual, beginning at this point, any time we are using a feature’s specialized name or
abbreviation as seen on the screen of the 10C, that name, feature, or abbreviation will be exactly as seen on the radio’s
screen, including capitalization and shown in a
DIFFERENT TYPE STYLE
for clarity. Any time we mention a specifi c control
on the radio itself, such as moving SWITCH A, KNOB VR(B), or the THROTTLE STICK, those words will be displayed
as they are here.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robbe Futaba FF-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robbe Futaba FF-10 in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robbe Futaba FF-10

Robbe Futaba FF-10 User Manual - German - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info