792895

Respekta PYRO 9 TOUCH Manual

52
Zoom out
Zoom in
Previous page
1/71
Next page
15
2.2 Time setting under function to be selected mode
If not setting the time when first connected to the main supply,you can adjust the time using
combination button “+” and “ ” under function to be selected mode,detailed operation is
same as the above.
3、The choice of function
3.1 Selection function:Under function to be selected mode, you can touch function
selector “ ” to choose 11 functions, the corresponding function icons are as below ( oven
function will remember the last operation).
Pic 5: Oven function mode
3.2 Temperature adjustment:When choosing function, clock position will display
corresponding function mode default cooking time(It will display “ECO” under Eco mode),
temperature will dispay corresponding function mode default temperature and
flash,temperature icon “ ”will keep bright(The default cooking time and temperature for
each function mode please refer to the part “Working mode menu” below),you can adjust
the cooking temperature by pressing “+”or “ ” at this time,the adjustment will be 5
degrees for a unit(The adjustable temperature range for each function mode please refer to
the part “Working mode menu” below as well).
Please note: When selecting the function, the defrost function and the high temperature
self-cleaning function can only adjust the cooking time, and the temperature cannot be
adjusted. At this time, the time value flashes.
3.3 Time adjustment: After temperature adjustment is completed, touching“ ”to switch to
cooking time adjustment, clock place will display corresponding function mode default
cooking time and flash(minute will be shown as 30:00), you can adjust the cooking time by
pressing “+”or “ ”(cooking time adjustable range is 05:00-90:00 minutes),time will change
5 minutes as a unit. (The minimum adjustable working time is minute, not second, just can
show 05:00 10:00 30:00,etc.)
After setup function, cooking time and temperature, touch to start working.
Pic 6: Set temperature parameter diagram during working
… 52 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Respekta PYRO 9 TOUCH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Respekta PYRO 9 TOUCH in the language / languages: English, German as an attachment in your email.

The manual is 1.45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info