Manual Respekta PYRO 9 TOUCH (page 51 of 71) (English, German)

792895

Zoom out

Zoom in

1/71

hour value 12 will flash, the clock can be set at this time, refer to clock setting requirement

for details.

All the backlights will turn on after 20s without any operation and the oven will enter function

to be selected mode.The oven will switch off if without any operation for 3 minutes,and

press any key at this time,it will return to function to be selected mode.

After the oven is energized, the oven door lock will perform self-inspection. During the self-

inspection, the door lock will automatically go back and forth once, and the door lock self-

inspection will be completed within 20 seconds. If the program automatically prompt the

error code during the oven self-inspection ,and the display shows “E-3”, please refer to the

part of “protection function11.5.1~11.5.2” for the specific cause analysis. At this time, press

the power button to cancel the alarm code. The program will enter the function to be

selected state.

Function to be selected mode: The display screen will show current time,all backlights of

the buttons will be on.

Stand-by mode: The display screen will show current time,all backlighst of the buttons will

be off.

Power off mode: The display screen will be off,and all backlight of the buttons will be off as

well.

2、Time setting

2.1 Time setting after the oven is energized:First time when the oven connects to the

main supply,and PCB board completed the self-inspection, default time will show 12:00 at

this time,display screen hour value “12” will flash(1 time/S), well set the hour time by

touching “+” or “ ”; (00~23~00 is recyclable)

Pic 3: Adjusting hour Pic 4: Adjusting minute

After setting hour time, use adjusting time combination button (Touching button “+”and “ ”

at the same time) to switch to minute adjusting. Minute “00” will flash at this time, by

touching “+”or “ ” to set minutes（0~59~0 recyclable）.

After setting minutes, re-touch the combination key to confirm, time setting is completed.

When setting hour, “ ”will display. When setting minutes, “ ”will display. After

confirmation, “ ”and“ ”will not display. Press and hold “+”or “ ” to quickly setup time.

If well set clock minutes for 10s without confirmation, the system will confirm automatically

and enter into function to be selected mode. If switch on 20s without time setting, system

time will be “12:00” by default and enter function to be selected mode. If the electricity is cut

off, clock needs to be reset.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Respekta PYRO 9 TOUCH in the language / languages: English, German as an attachment in your email.

The manual is 1.45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Respekta PYRO 9 TOUCH Manual

Product: