8437
33
Zoom out
Zoom in
Previous page
1/36
Next page
33
false flame at flame guard 1 Check: - if the gas valve circuit is interrupted
- if the electrode is not in contact with the burner
false flame at flame guard 2
flame 1 lost Check: - wiring of the first and second ionization electrode
during burning - position of the first and second ionization electrode; distance from
electrode to burner: approx. 11 mm
flame 2 lost - the gas pressure to the boiler
during burning - gas valve opening
no flame 1
during full ignition
no flame 2
during full ignition
no flame 1
during main ignition
no flame 2
during main ignition
flame 1 lost
in startpart. load
flame 2 lost
in startpart. load
shutdown input 1 is activated Check: - whether any connected contacts are closed
shutdown input 2 is activated - the wiring to the input
- correct connector connection
locking input 1 is activated Check: - whether any connected contacts are closed
locking input 2 is activated - the wiring to the input
- correct connector connection
output relay Check: - print wiring
failure - fuse F3 on outgoing print (4,0 AT)
If OK, replace outgoing print.
gas leak VA1 A gas leak has been detected (only with gas leak control fitted).
detected Check: - Gas connections, gas pipes, measuring nipples
If OK, replace gas block.
gas leak VA2 Attention: When no gas leak control mounted, check whether programmation of gas leak
detected control option shows "no" (see par. 7.3.3, option no. 4)
excessive airpress. during stg 1 burning Air pressure differential too high.
Check: - the wiring to the frequency regulator
- the frequency regulator
- connection to air pressure differential switch (LDS)
airflow signal fault The air pressure differential sensor gives out a signal < 0,5 Volt.
Check: - the wiring to the frequency regulator
- the air pressure differential sensor
- connection to air pressure differential switch (LDS)
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remeha Gas 3002 ECO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remeha Gas 3002 ECO in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Remeha Gas 3002 ECO

Remeha Gas 3002 ECO User Manual - German - 28 pages

Remeha Gas 3002 ECO Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info