Manual Remeha Gas 3002 ECO (page 35 of 36) (English)

8437

Zoom out

Zoom in

1/36

13. INSPECTION AND SERVICING

13.1 General

To ensure optimal combustion, the boiler, associated

equipment and the boiler room must be cleaned at least

once a year. This is to avoid fouling of the burners and

the boiler during operation as a consequence of dust

in-take, especially with the Remeha Gas 3002 ECO in

room ventilated form. This will ultimately result in poor

combustion and the possible formation of soot.

13.2 Servicing

Before boiler maintenance is started, the following parts

must be removed:

- Top and front casings, as well as the top side casing at

the side of the connections.

Maintenance work includes:

a. Cleaning the flue gas part of the boiler and the ECO.

- Inspection for fouling of the boiler block by removing

of one or two burner units (incl. mixing section,

see fig. 23). If cleaning is required, all burner units

must be removed. Next remove the front plate of the

transition piece between the first and the second

heat exchanger (see part A, fig. 24). Having removed

the supports (see part D, fig. 24) which hold down

the flue gas drawers (see part C, fig. 24) between

the sections, remove the flue gas drawer downwards

at an angle. The boiler block can now be cleaned

from the top using a cleaning brush.

To avoid dirt from falling on the second heat exchan-

ger, we recommend placing a sheet of cardboard

between the first and second heat exchanger.

- Checking the burners.

The burner surface must not be mechanically

cleaned.

When cleaning is necessary, this can be done

using low pressure air.

- Check the ECO for fouling through the inspection

covers (see part B, fig. 24) in the front plate of the

ECO (boiler with 7 sections only has 1 inspection

cover).

If cleaning is required, the front plate of the ECO

must be removed. Clean with water and, if necessary,

with a nylon brush.

b. External cleaning of the boiler casing.

c. External cleaning of the equipment: ignition device,

ionization electrode, cabling and gas equipment.

d. Cleaning of the fan.

Reassemble the parts. Special attention should be

paid to the various seals (boiler is pressurised). Any

damaged or hardened (powdery white appearance)

seals must be replaced.

e. Checking the control and the safety signalling of the

flame monitoring device.

f. Checking the load control.

g. Determining the efficiency.

h. Checking the overall condition of the installation

(leak detection, etc.).

Cross section

Fig. 24 Sectional drawing of the ECOFig. 23 Fastening points of burner unit

* Only 7-9 leden

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Remeha Gas 3002 ECO in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Remeha Gas 3002 ECO

Remeha Gas 3002 ECO User Manual - German - 28 pages

Remeha Gas 3002 ECO Manual - Dutch - 2 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info