Manual RadioShack PRO-94 - 1000-Channel (page 41 of 72) (English)

569958

Zoom out

Zoom in

1/72

Trunking Operation

3. Use the number keys to enter a valid frequency

within the trunk system, then press

E (SVC)

BANK

and the bank number, the channel number, and

(EDACS) or

(Motorola) appears depending upon

the trunk system selected.

Notes:

• If you enter an invalid frequency (outside the

selected range), the scanner beeps, the channel

number flashes and

Error

appears. If this hap-

pens, press

MON/CLR

(

•

) to clear the frequency,

then repeat the entry.

• For EDACS systems, you must enter the fre-

quencies in logical channel number (LCN) order.

• If you try to enter a duplicate frequency in a bank,

the scanner beeps and the channel which was

previously stored appears.

• It is very important that you enter all the listed fre-

quencies for the selected agency in Step 3. Oth-

erwise, trunking will not occur when you press

SRC

in Step 6.

4. Press either

PROG

to select the next channel

in the bank.

5. Repeat Steps 3 and 4 until you enter all desired fre-

quencies in that bank.

6. Press

SCAN

, then

SRC

to begin searching for the

trunk’s data channel and scan conventional fre-

quencies at the same time.

the scanner looks through the frequencies, you

see them on the display. When the scanner finds

the controlling data channel, the scanner begins

trunking.

–

900

Motorola Type II, 900 MHz frequencies

–

Motorola Type II, VHF frequencies

–

UHF

Motorola Type II, UHF frequencies

You See Trunk System

20-524A.fm Page 41 Tuesday, June 27, 2000 3:41 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack PRO-94 - 1000-Channel in the language / languages: English as an attachment in your email.

The manual is 1,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

RadioShack PRO-94 - 1000-Channel Manual

Product: