569958
39
Zoom out
Zoom in
Previous page
1/72
Next page
39
Trunking Operation
centralize their communications and control the type of
users on a single system. Determining the exact fleet-
subfleet hierarchy for a particular area is referred to as
fleet map programming
.
The disadvantage of a Type I system is that the brief
burst of data sent when a user transmits must contain
the radio’s ID, its fleet information, and the subfleet infor-
mation as well. This is three times the amount of data a
Type II system radio sends. Since the data capacity of
Type I systems is limited and the total amount of data in-
creases with each user, Type I systems usually accom-
modate fewer users than Type II systems. Nevertheless,
Type I systems are still in use.
There are also
hybrid
systems which are a combination
of Type I and Type II. Your scanner is preset to monitor
Type II systems, but you can change to Type I or a hy-
brid of Type I and Type II systems by selecting a prepro-
grammed fleet map or creating a custom fleet map for
your area (see “Scanning Type I and Hybrid Trunked
Systems” on Page 51).
SETTING THE SCANNER TO THE
TRUNKING MODE
Simultaneous Trunking
The scanner allows you to track up to 10 systems at a
time. You can trunk scan or search and scan conven-
tional frequencies at the same time. You can also pro-
gram conventional frequencies in the same bank as
trunking systems.
After the scanner is finished checking activity in the
trunked system, it scans other conventional frequencies
in the bank. (Only trunking frequencies are programmed
in trunk mode.)
If a system is inactive for 1 second and there are no con-
ventional channels in the bank, the scanner starts scan-
ning the next selected trunk bank. If you turned
DELAY
on, the scanner starts scanning the next trunk bank after
about 5 seconds.
20-524A.fm Page 39 Tuesday, June 27, 2000 3:41 PM
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for RadioShack PRO-94 - 1000-Channel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack PRO-94 - 1000-Channel in the language / languages: English as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info