569958
42
Zoom out
Zoom in
Previous page
1/72
Next page
42 Trunking Operation
SEARCHING A TRUNKED BANK
Once the data channel is acquired, the scanner begins a
trunk search. With the search function, you will be able
to find all the active talk groups within the trunked sys-
tem. Press
SCAN
. You can switch to the trunk scan
mode from the trunk search mode. See “Scanning the
Talk Group ID Lists” on Page 50.
While scanning conventional frequencies, follow the
steps below to switch to the trunk mode after the scan-
ner finds the data channel.
1. Press
TRUNK
. The scanner begins scanning both
trunking and conventional banks.
2. Hold down
SCAN
for about 1 second. The scanner
switches to the trunk scan mode.
3. Hold down
SRC
for about 1 second. The scanner
switches to the trunk search mode.
Hint:
While searching, you may not know exactly to
whom the talk group IDs are assigned until you listen
awhile. To locate talk group ID lists for your local police,
fire, and other agencies, refer to frequency guides avail-
able at your local RadioShack store or on internet sites
such as
www.trunkscanner.com
. You can also deter-
mine the type of agency you are listening to after a short
while, be it a police, fire, or emergency medical 2-way ra-
dio user. Once you have identified the type of service,
note the associated talk group ID of that unit for future
programming. See “Identifying a Trunked Frequency” on
Page 44. Determining the service associated with a talk
group ID might take awhile, but discovering the ID owner
of each signal is half the fun of trunk scanning!
Turning a Trunked Bank On or Off
Press
DATA (ALT)
during trunk scanning. The selected
trunked banks appear. Press the bank number (
0
9
), to
turn the desired bank on or off.
20-524A.fm Page 42 Tuesday, June 27, 2000 3:41 PM
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for RadioShack PRO-94 - 1000-Channel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack PRO-94 - 1000-Channel in the language / languages: English as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info