569958

RadioShack PRO-94 - 1000-Channel Manual

43
Zoom out
Zoom in
Previous page
1/72
Next page
43
Trunking Operation
Skipping a Trunked Bank
You can scan conventional frequencies programmed in
the same bank by holding down
SRC
(
LIMIT
) for about 2
seconds. If there is no conventional frequency, the scan-
ner scans the next bank.
Turning the Status Bit Ignore (S-Bit)
On or Off
You can set how your scanner works with
status bits
(also called S-Bits), letting you control how the scanner
interprets and displays talk group IDs.
The last four bits of a Motorola Type II talk group ID (a
binary 16-bit code) are the status bits. In some systems,
status bits identify special situations (such as an emer-
gency status).
Your scanner is preset to assume that the status bits in a
talk group ID are set to 0 and ignores them. For exam-
ple, when the scanner receives the talk group ID
010111001110
0011,
it reads the ID as 010111001110
0000
and converts the first 12 bits of the ID to 23776 (the
talk group ID). However, since the status bit value is 3
(0011 converted to decimal equals 3), the ID is actually
23779.
If you are scanning a Motorola Type I system and do not
have a fleet map for that system, you might have to turn
off status bit ignore in order to determine the proper fleet
map.
Important:
If you are scanning any system other than a
Motorola Type I system, be sure status bit ignore is set
to
ON
or you will miss some transmissions.
Follow these steps to turn status bit ignore on or off.
1. Hold down
SCAN
until the current status bit ignore
setting (
ON
or
OFF
) appears.
2. Press
8
88
8
to select
ON
or
9
99
9
to select
OFF
, then
press
E (SVC)
.
20-524A.fm Page 43 Tuesday, June 27, 2000 3:41 PM
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for RadioShack PRO-94 - 1000-Channel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack PRO-94 - 1000-Channel in the language / languages: English as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info