713889

Quickie Life i Manual

22
Zoom out
Zoom in
Previous page
1/96
Next page
ENGLISH
22
Life i Rev.6.0
SIDE GUARD, FLIP-UP, REMOVABLE WITH SHORT OR
LONG ARMRESTS, HEIGHT-ADJUSTABLE
The armrest can be height adjusted as follows.
Move the lever downwards and move the armrest to the desired
height.
Release the lever and press the armrest downwards until you
hear it click into place. Always check that the sideguards are
correctly engaged.
To flip the armrest up, push the lever
(1) so that the sideguard is released.
The length of the armrest can be
adjusted by releasing the screws (2)
then push the armrest to the desired
position and re-tighten the screws
(Fig. 6.36).
CAUTION:
• Neither the sideguards nor the armrests are to be used for lifting
or carrying the wheelchair.
• When using a 24” (609.6 mm) rear wheel the armpad must be
moved one level up.
The height of the armrest (2) can
be adjusted by fitting the
spacer bracket in various
positions. To do this release the
screws, move the spacer bracket
and re-tighten the screws. The
length of the armrest can be
adjusted by releasing the screws
(3), then move the armrest to the
desired position and re-tighten the
screws (Fig. 6.35).
Sideguards
Central support
Installation: Slide the arm post into the receiver, located on the
wheelchair frame, until it stops
Height adjustment:
Slide the arm rest post out of the receiver.
Adjust the position of the hight adjustment bracket (1) by
removing the screw (2) and moving it to the desired posiion.
Re-fit the screw and tighten it.
Slide the arm rest post back into the receiver, (Fig. 6.31).
Armpad Position:
The armpad position can be adjusted by relesing the screws
(3), then moving the arm pad to the desired position. Re-tighten
the screws, (Fig. 6.31).
Adjusting Armrest Receiver
The tightness of the armrest receiver can be adjusted (tightened
/loosened) by means of the 2 screws (1) - (Fig. 6.32).
Sideguard With Clothes Protector (Fig. 6.33)
The clothes protector prevents clothes getting dirty from spray
water. You can set the position in relation to the rear wheel by
moving the sideguard.
To do this, remove the fixing screws (1 and 2).
After setting to the desired position, re-tighten the screws (see
the page on torque).
WARNING!
Neither the sideguards nor the armrests are to be used for
lifting or carrying the wheelchair
Fig. 6.31
1
2
3
Fig. 6.32
1
Fig. 6.33
1
2
STANDARD SIDEGUARD,
SIDE GUARD, FLIP-UP, REMOVABLE WITH SHORT OR
LONG ARMRESTS, HEIGHT-
ADJUSTABLE
WITH SHORT OR LONG
ARMRESTS
The sideguard with rounded off
front edges will allow you to get up
close to a table. To flip the armrest
up, push the lever (1), so that the
sideguard is released (Fig. 6.34
and 6.35).
1
2
Fig. 6.34
Fig. 6.35
3
1
2
Fig. 6.36
CAUTION:
• Neither the sideguards nor the armrests are to be used for
lifting or carrying the wheelchair.
• Take care of your fingers when adjusting the arm pad height.
One Hand Operation Armpad
By pressing lever (1) the
height can be adjusted with
one hand.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Quickie Life i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Quickie Life i in the language / languages: English, Dutch, French, Italian as an attachment in your email.

The manual is 3,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info