713889

Quickie Life i Manual

24
Zoom out
Zoom in
Previous page
1/96
Next page
ENGLISH
24
Life i Rev.6.0
Fig. 6.42
Height-Adjustable Push Handles (Fig. 6.42)
These handles are secured with pins to prevent them from sliding out
uninten tion ally. Opening the quickrelease
lever makes it possible to adjust the height of the push handles
to meet your individual needs. As you move the lever, you will hear a
locking mecha nism; you may now easily position the push handle as
desired. The nut on the tension lever
determines how tightly the push handles are clamped into place. If the
nut is loose after adjusting the tension lever, the push handle will also
be too loose. Turn the push handle from side to side before use to
make sure that it is clamped securely enough into place. After
adjusting the handle height, always clamp the tension lever securely
into place. If the lever is not secure, injuries could result when
ascending stairs.
Push handles
Push handle
Fold-Down Push Handles (Fig. 6.43)
If the push handles are not in use, they can be folded down by
depressing the button, (1). When they are needed again, simply flip
them back up until they click into place.
Fig. 6.43
1
Anti-tip tubes
Anti-Tip Tubes (Fig. 6.44)
Anti-tip tubes (1) provide additional safety for inexperienced users
when they are still learning how to operate their wheelchairs. Anti-tip
tubes (1) prevent a wheelchair from tipping over backwards. The anti-
tip tube (1) can be swung downwards by pushing it or rotated
forwards. There should be a gap of 30 mm to 50 mm to the floor. To go
up or down a step (e.g. kerb) the anti-tip tubes must be swung
forwards, to prevent them from touching the ground.
CAUTION!
Do not insert both buttons of the anti tip tube into the frame tube as
this could damage the anti Tip and cause a loss of effectiveness.
By pushing on the Second exposed release button, the safety wheels
can be set upwards or removed. There must always be a gap of
between 30 mm and 50 mm between the tube and the ground. You
must swing the safety wheels upwards when going up and down large
obstacles (such as a kerb) to prevent them from touching the ground.
Then rotate the safety wheels back down to the normal position (Fig.
6.44).
WARNING!
Incorrect set up of the anti tips will increase the risk of a rearwards tip.
Fig. 6.44
1
Crutch Holder
Crutch Holder (Fig. 6.45)
This device permits crutches to be transported directly on a
wheelchair. It has a Velcro loop to fasten crutches or other aids.
CAUTION!
Never try to use / remove the crutches or other aids while moving.
Fig. 6.45
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Quickie Life i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Quickie Life i in the language / languages: English, Dutch, French, Italian as an attachment in your email.

The manual is 3,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info