Manual Quickie Life i (page 21 of 96) (English, Dutch, French, Italian)

713889

Zoom out

Zoom in

1/96

ENGLISH

Life i Rev.6.0

Folding stabilising bar

This bar is used to stabilize the

backrest.

To be able to fold the wheelchair,

the release lever must be pushed

inwards (Fig. 6.29) or released and

the stabilising must be flipped

downwards. When unfolding the

wheelchair, please make sure that

the stabilising bar is locked into

position.

Headrest (Fig. 6.28)

You can adjust the height of the

headrest and it can be moved

forwards and backwards,

horizontally. To do this, loosen the

screw (1 or 2). This is how you can

adjust to the required positions.

Re-tighten the screws (see the

page on torque).

Adjustable Back Sling,

(Fig. 6.26)

The adjustable back sling can be

adjusted for tension by parting the

Velcro® straps and moving them

through the buckles (1). When the

desired tension is achieved, press

the Velcro back together.

Repeat the process for each strap.

The back sling upholstery can be

accessed from the inside via an

opening and can be padded to suit

individual tastes.

WARNING!

Ensure that each strap is firmly secured before using the wheelchair.

Backrest

Height-adjustable Backrest

The backrest height can be

adjusted from 350 mm -

500 mm (depending on the

backrest position). Release the

bolts (1)+(2), and push the

backrest tube to the desired

position. Tighten up the bolts

again (Fig. 6.23).

Fig. 6.23

Angle Adjustable Backrest

The angle of the backrest

can be set to 6 different

positions (-5° forwards, 0°, 5°,

10°, 15° and 20° backwards).

To adjust the angle, remove

the screw (1), set the desired

angle and then re-tighten the

screw. (Fig. 6.24). By

releasing the clamp lever (1)

the backrest height can be

infinitely adjusted from 350

mm – 500 mm.

Fig. 6.24

Adjusting the backrest

angle

(7° - 30°)

By pulling both levers

together (1), you can release

the backrest and then move

it to the desired position.

On releasing the two levers

(1) the backrest will

automatically lock into place

(Fig. 6.25).

WARNING!

• The reclining backrest can only be used in conjunction with

the wheelbase extension.

• It is recommended that the reclining backrest is used in

conjunction with anti-tip tubes (maximum ground clearance

30 mm - 50 mm).

• We recommend that the reclining backrest is used in

conjunction with a stabilising bar.

Fig. 6.25

Trunk support

The trunk support can be adjusted

in angle, depth and height (see Fig.

6.27). It can be swung away by

turning the release lever (1).

Headrest

Fig. 6.28

Stabilizing Bar

Fig. 6.29

Fig. 6.27

One Hand Operation

(Fig. 6.30 - 6.30.1)

To propel the chair straight forward

both handrims must be used.

To fold the wheelchair disconnect

the telescopic bar by pushing the

release inward (1). To take off the

wheels pull release knob (2).

CAUTION!

Make always sure that the

connections are set properly to

avoid injuries.

Fig. 6.26

Fig. 6.30

Fig. 6.30.1

Options – One Hand Operation

(1)

(2)

(1)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Quickie Life i in the language / languages: English, Dutch, French, Italian as an attachment in your email.

The manual is 3,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Quickie Life i Manual

Product: