782211
12
Zoom out
Zoom in
Previous page
1/24
Next page
To guarantee the highest possible flexibility, we offer
different types of limit stops that are included with
the machine. So there is something for every appli-
cation:
There is a longitudinal stop that runs in a guide along
the front of the bench that can be easily shifted and
arrested by hand, or which can be used with the pre-
cisely adjustable graduated scale.
Adjusting capabilities in the tenth of a millimetre
range leave nothing to be desired and make it easy
to saw work pieces to the desired, previously ad-
justed measure.
In addition there is a sophisticated and precise angle
stop which can be extended with an aluminium pro-
file strip with a moving clamping piece for the exact
reproduction of many parts to be sawed out with
equal angles and each with the same dimensions.
The safety aspect was taken care of as well: The saw
blade is covered by a sturdy saw blade guard which
automatically moves up when contact is made with
the work piece, and which only releases as much of
the saw blade as necessary.
Caution!
For your own safety, it is understood that the saw
may never be operated without this protective guard!
The upper part of the device is hinged so that it can
be opened for cleaning and maintenance purposes.
Thus the interior of the device can be cleaned of
chips and dust with a vacuum cleaner, for example.
To exclude any kind of hazard, a switching contact
disconnects the electrics from the power mains
when the upper housing part is open.
But during all cleaning, maintenance and adjusting
work (and of course during sawing) please remember
that your FET is not a play toy but a tool for wood-
working and is thus a potential source of danger!
Among others a push-rod for the secure feed of
more compact work pieces and two Allen keys are
also included in the delivery. These can be stored in
a „key parking slot“ on the right side of the housing.
In the interests of your own safety, please carefully
read through and comply with the attached safety
notes, which are also mentioned in these instruc-
tions, and make sure that you have also understood
them!
Legend (fig. 1)
1. Saw blade guard
2. Saw table
3. Saw blade
4. Connection for dust suction
5. Longitudinal stop
6. Key parking slot
7. Rubber connecting piece for suction
8. Allen key
9. Allen key
10. Push-rod
11. Angle stop
12. Knurled screw for fine adjusting
13. Motor unit
14. Angle scale for saw blade tilt
15. Saw blade adjustment for depth of cut
16. Clamping piece
17. Limit stop strip
18. Mains cable
19. On - Off switch
20. Scale for longitudinal stop
21. Extendable saw support
22. Auxiliary stop
Technical data
Rotational speed: 6000 rpm
Saw blade diameter max. 3 11/32” (85 mm)
Depth of cut max.: ca. 1” (25 mm)
(in wood, with blade
Ø 3 5/32”, 80 mm)
Saw blade drill hole: 13/32“ (10 mm)
Motor:
Voltage: 110-120 Volt, 50/60 Hz
Power consumption: 1,6 A STS 10 min
12
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Proxxon FET at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Proxxon FET in the language / languages: English as an attachment in your email.

The manual is 1.55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info