782211

Proxxon FET Manual

10
Zoom out
Zoom in
Previous page
1/24
Next page
nected to the power source receptacle before chang-
ing any parts or tools (i. e. saw blade)
For your own safety, use only saw blades sized and
recommended for this table saw. Follow the instruc-
tions that accompany the millers.
To avoid fire or toxic reaction, never use gasoline,
naphtha, acetone, lacquer thinner, or similar highly
volatile solvents to clean the table saw.
Do not allow brake fluids, gasoline, or penetrating
oils to come in contact with the plastic parts. They
contain chemicals that can damage or destroy plas-
tics.
When servicing use only PROXXON replacement
parts. Use of any other parts may create a hazard or
cause product damage.
Any attempt to repair or replace electrical parts on
this lathe may create a hazard unless repair is done
by a qualified service technician. Repair service is
available at your PROXXON service center (You find
the address at the back of this manual)
Never work with a device that has faulty or defective
parts. Your table saw might no longer be safe. There-
fore, have any damage immediately repaired by the
Proxxon Customer Service!
WARNING:
Some dust created by power sanding, sawing, grind-
ing, drilling, and other construction activities contains
chemicals known to the State of California to cause
cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well venti-
lated area, and work with approved safety equip-
ment, such as those dust masks that are specially
designed to filter out microscopic particles.
Use a vacuum cleaner for wood dust collection as
described in our manual whenever possible.
Grounding instructions:
1. All grounded, cord-connected tools:
In the event of a malfunction or breakdown, ground-
ing provides a path of least resistance for electric
current to reduce the risk of electric shock. This tool
is equipped with an electric cord having an equip-
ment-grounding conductor and a grounding plug.
The plug must be plugged into a matching outlet that
is properly installed and grounded in accordance
with all local codes and ordinances. Do not modify
the plug provided — if it will not fit the outlet, have
the proper outlet installed by a qualified electrician.
Improper connection of the equipment-grounding
conductor can result in a risk of electric shock. The
conductor with insulation having an outer surface
that is green with or without yellow stripes is the
equipment-grounding conductor. If repair or replace-
ment of the electric cord or plug is necessary, do not
connect the equipment-grounding conductor to a
live terminal. Check with a qualified electrician or
service personnel if the grounding instructions are
not completely understood, or if in doubt as to
whether the tool is properly grounded.
Use only 3-wire extension cords that have 3prong
grounding plugs and 3pole receptacles that accept
the tool’s plug.
Repair or replace damaged or worn cord immedi-
ately.
2. Grounded, cord-connected tools intended for use
on a supply circuit having a nominal rating less
than 150 volts:
This tool is intended for use on a circuit that has an
outlet that looks like the one illustrated in Sketch A in
Figure 72.1. The tool has a grounding plug that looks
like the plug illustrated in Sketch A in Figure 72.1. A
temporary adapter, which looks like the adapter illus-
trated in Sketches B and C, may be used to connect
this plug to a 2-pole receptacle as shown in Sketch
B if a properly grounded outlet is not available. The
temporary adapter should be used only until a prop-
10
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Proxxon FET at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Proxxon FET in the language / languages: English as an attachment in your email.

The manual is 1.55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info