490678

Protool RGP3 Manual

7
Zoom out
Zoom in
Previous page
1/63
Next page
7
Tool Specifications
Renovation Grinder RGP 3
Power consumption 750 W
No-load speed 18 500 / 15 000 min
-1
Grinder spindle threads M 4 (left-hand)
Circumferential speed 35 m · s
-1
Grinding disk dia. 2 x 44 mm, 1 x 35 mm
Total weight 2,6 kg
Protection class II /
Controls Elements
1 Spindle locking button
2 Vacuuming hood
3 On/Off switch
4 Auxiliary handle
5 Brush insert
6 Torx screw
7 Grinding tool
8 Screw
9 Torx key
10 Vacuum opening
Abgebildetes oder beschriebenes Zubehör gehört
teilweise nicht zum Lieferumfang.
Noise/Vibration Information
Measured values determined according to
EN 50 144.
Typically the A-weighted noise level of the tool are:
Sound pressure level: 96 dB (A).
Sound power level: 109 dB(A).
Wear ear protection!
The typical weighted acceleration is 5,2 m/s
2
.
Intended Use
The machine is intended for the removal of plaster,
paint, adhesive residue, coatings, and rust as well as
the cleaning of concrete, metal and wood surfaces.
The machine may be used only for dry grinding.
Notes on Safety Prevention
Safe operation of this machine is pos-
sible only when the operating instruc-
tions and the safety precautions are
read completely and the instructions
contained therein are strictly
observed.
❑
For further notes on safety refer to enclosed
Sheet.
❑
The machine is not qualified for operation in
environments where danger of explosion exists.
❑
Always inspect cable and plug before using
machine. Only have damage repair by a qualified
professional.
❑
For work outdoors, use only extension cables
and coupling plugs that are certified for such use.
❑
The dust generated when working is injurious to
health. Use dust vycuuming and wear dust pro-
tection masks when working.
❑
Do not work with material containing asbestos.
❑
When grinding metal, saprks are genrated.
Because of the danger of fire, no combustible
material must be present in the area of flying
sparks.
❑
Provide for secure footing when working.
❑
Always place the cable to the rear away from the
machine.
❑
Apply the machine to the material to be worked
only after it has been switched on.
❑
Wear protective goggles and ear protector
❑
The machine must not be used when damp and
must not be operated in a wet environment.
❑
Clamp the workpiece securely in case it does not
remain in position from its own weight.
❑
Do not carry the tool by the power cord.
❑
Put the plug into the main socket only when he
machine is switched off.
❑
Always remove the plug from the power supply
socket before carrying out any work on the
machine.
❑
Use only grinding tools whose allowable speeds
are at least as high as the highest no-load speed
of the machine.
❑
Press the spindle locking button only when the
grinder spindle is at a standstill.
❑
Persons under 16 are not permited to use the
appliance.
GB
RGP 3 - GB Seite 7 Freitag, 16. Juli 1999 11:15 11
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Protool RGP3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Protool RGP3 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info