490678
9
Zoom out
Zoom in
Previous page
1/63
Next page
9
Application Table
The information given here are recommendations.
The optimum combination is best determined with
practical trials.
a
- Grinding plate with diamond
coating
b
- Grinding plate with hard metal
content FINE
c
- Grinding plate with hard metal
content ROUGH
d
- Grinding plate with silicium-
carbide content
Storage
The unit should be stored in a dry place where it is
protected against freezing.
Environmental Protection
Do not open worn out machines and return to the
collection facilities provided for recycling.
Maintenance
The ventilation slots (3) on the motor casing
should be cleaned out from time to time.
Maintenance and repair work that requires the
opening of the machine may be performed only
by an authorised customer service workshop.
When the carbon brushes are worn out, the
machine switches itself off. The machine must
then be sent to customer service for maintenance
(see enclosed sheet).
Service
See enclosed sheet.
Guarantee
We guarantee PROTOOL appliances in accordance
with statutory/country-specific regulations (proof
of purchase by invoice or delivery note).
Damage attributable to normal wear and tear, over-
load or improper handling will be excluded from the
guarantee.
In case of compliant please send the machine,
undismantled, to your dealer or the Service Centre
for electric power tools.
Declaration of Conformity
We declare under our sole responsibility that this
product is in conformity with the following stand-
ards or standardization documents: EN 50 144,
EN 55 014, EN 60 555, HD 400 according to the
provisions of the regulations 73/23/EEC,
89/336/EEC, 89/392/EEC.
Dr.ÊJosefÊLorenz
PROTOOL, Narex ‰esk‡ L’pa A.S.
47037 ‰esk‡ L’pa
Subject to change
Grinding Plate Application
abcd

Grinding of overhangs and unevenness
on poured flooring

Removal of unevenness and form transi-
tions on exposed concrete

Grinding of soiled and weathered con-
crete surfaces

Rounding the edges of concrete parts

Grinding of cement facing

●●
Roughing or grinding off of plaster
●●
Removing of oil paint from plastered sur-
faces
●●
Grinding off of bituminous and concrete
paints
●●
Removing of coatings and elastic paints
(e. g. cellar stairs, furnace rooms, balco-
nies, etc.)

Removing of epoxy resin from cement
and poured flooring surfaces

Removing of paint and rust from metal
parts

Grinding and roughing of flat surfaces on
tiles
●●
Grinding off of tile adhesive and mineral
adhesive residues
RGP 3 - GB Seite 9 Freitag, 16. Juli 1999 11:15 11
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Protool RGP3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Protool RGP3 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info