Manual Pride Colt Deluxe 2.0 (page 36 of 44) (English)

722005

Zoom out

Zoom in

1/44

Mid-size Scooter Series

VIII. CARE AND MAINTENANCE

Follow these easy steps for a quick and safe repair

for solid tires:

1. Remove the key from the key switch.

2. Elevate the side of the scooter of which you are

removing the tire. Place wooden blocks under the

frame to elevate the scooter.

3. Remove the wheel cap, drive wheel nut and

washer from the axle. See figure 24.

4. Pull the wheel off of the axle.

5. Slide the new wheel onto the axle. Make sure the

the axle key is in the axle slot.

WARNING! Ensure that the axle key is

properly installed into the axle slot

when mounting the wheel. If not

installed securely, the braking system

is disengaged which may cause

personal injury and/or product

damage may result.

6. Reinstall the drive wheel nut and washer onto the

axle and tighten.

WARNING! Make sure that both the

nut and washer are reinstalled and

tightened properly.

7. Reinstall the wheel cap.

8. Remove the blocks from beneath the scooter.

Figure 24. Wheel Removal

IDENTIFICATION KEY

1. WHEEL CAP

2. DRIVE WHEEL NUT

3. DRIVE WHEEL WASHER

4. WHEEL

5. AXLE KEY

6. AXLE SLOT

Your scooter requires a minimal amount of care and maintenance. If you do not feel confident in your

ability to perform the maintenance listed below, you may schedule inspection and maintenance at your

authorized Provider. The following areas require periodic inspection and/or care and maintenance.

SOLID TIRE SAFETY CHECK

Regularly inspect your scooter’s tires for signs of damage or wear.

WHEEL REPLACEMENT – SOLID TIRES

If your scooter is equipped with solid tire inserts and you have a damaged or worn tire, the entire wheel

must be replaced. Contact your authorized Provider for information regarding replacement wheels for your

scooter.

WARNING! Wheels on your scooter should only be serviced/replaced by a

qualifiedtechnician.

WARNING! Be sure that the key is removed from the key switch and the scooter is not in

freewheel mode before performing this procedure.

TIRE PRESSURE – PNEUMATIC TIRES

 If equipped with pneumatic tires, always maintain the psi/bar/kPa air pressure rating indicated on

each tire.

I bought a 'new' Pride Colt Deluxe 2.0. Later I discovered that both Track Rods where they fit on the Track Rod Ends as best as I could see has some play in them. I rang up the Shop who supplied it, & they sent someone out with a Tie Rap, & then put one on each of them to hold them firmly together. My question is, is this standard procedure when dealing with Mobility Scooters, or are they manufactured 'disabled' to be like the Owner ? Submitted on 3-10-2024 at 20:35
Reply Report abuse
Console shows three green lights are out while charger is flashing fully charged Submitted on 15-10-2023 at 15:01
Reply Report abuse
How do I enable the scooter to go from pushing to driving mode? Submitted on 1-7-2023 at 19:42
Reply Report abuse
Why is my suspension on my pride deluxe Colt so tight Submitted on 21-9-2021 at 11:28
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pride Colt Deluxe 2.0 in the language / languages: English as an attachment in your email.

The manual is 2,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pride Colt Deluxe 2.0 Manual

Product: