722005

Pride Colt Deluxe 2.0 Manual

33
Zoom out
Zoom in
Previous page
1/44
Next page
33
Mid-size Scooter Series
VI. DISASSEMBLY AND ASSEMBLY
Frame Separation
1. Arrange the front wheel(s) in a straight forward-facing position.
2. With the seat and batteries removed (see Disassembly Procedures on previous page), lower the tiller
and tighten the tiller adjustment knob. See figure 14 or 22.
NOTE: The pivoting tiller is equipped with a mechanism that will lock the front wheels in place when
the tiller is completely lowered and secured.
3. Remove the frame lockup pin (Model 104 only.) See figure 23.
4. Lift up on the frame release lever, (OR, lift the seat post for model 104) and pivot the rear section
backwards, until the frame hooks are no longer resting on the lower frame tube.
5. Slowly separate the two sections.
Figure 23. Frame Release Lever (Style A) and Frame Release Lockup Pin (Style B)
IDENTIFICATION KEY
1. FRAME HOOK
2. LOWER FRAME TUBE
ASSEMBLY
1. Position the front and rear sections of your scooter as shown in figure 23.
2. Use the frame release lever (or the seat post for model 104) to lift the front section as you align the
frame hooks of the front section with the lower frame tube of the rear section. See figure 23.
3. Once the frame hooks are over the lower frame tube, lower the front section and pivot the rear section
simultaneously. This will engage the frame lockup automatically for all models except 104. For model
104, you will also need to reinstall the frame lockup pin to complete the body assembly.
4. Raise the tiller and fully tighten the tiller adjustment knob.
5. Reinstall the batteries to the battery wells.
6. Properly connect all the battery harnesses. See figure 11.
7. Secure the battery tie-down strap. For model 104, also reconnect both front-to-rear harnesses.
8. Reinstall the battery shroud.
9. Reinstall the seat and rotate it into place.
WARNING! After assembly, make absolutely certain the tiller lock knob is in the
unlocked position before driving the scooter.
2
1
A
B
… 33 …


Need help? Post your question in this forum.

Forumrules
1

Forum

pride-colt-deluxe-2.0

Reset search

  • I bought a 'new' Pride Colt Deluxe 2.0. Later I discovered that both Track Rods where they fit on the Track Rod Ends as best as I could see has some play in them. I rang up the Shop who supplied it, & they sent someone out with a Tie Rap, & then put one on each of them to hold them firmly together. My question is, is this standard procedure when dealing with Mobility Scooters, or are they manufactured 'disabled' to be like the Owner ? Submitted on 3-10-2024 at 20:35

    Reply Report abuse

  • Console shows three green lights are out while charger is flashing fully charged Submitted on 15-10-2023 at 15:01

    Reply Report abuse

  • How do I enable the scooter to go from pushing to driving mode? Submitted on 1-7-2023 at 19:42

    Reply Report abuse

  • Why is my suspension on my pride deluxe Colt so tight Submitted on 21-9-2021 at 11:28

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pride Colt Deluxe 2.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pride Colt Deluxe 2.0 in the language / languages: English as an attachment in your email.

The manual is 2,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info