782000
39
Zoom out
Zoom in
Previous page
1/68
Next page
GB | 31
Have the serial number of your robot mower ready
for registration. You will nd this on the type plate of
the unit.

Art-Nr.: 3913001xxx
20V
.
n
0
: 2800 min
-1
.
36 Wh
Ø 18 cm
. 8 kg . IPX5
manufactured: 12/2020 S.Nr.: 0169-01001
Woodster GmbH - Günzburger Straße 69 - 89335 Ichenhausen - Germany
9.4.2 Communication / data transmission
The app communicates with the robot mower either
via Bluetooth or WiFi.
m NOTE
Depending on your contract with your mobile phone
provider or internet provider, the data transfer from
the app to the internet may incur costs that you will
have to bear yourself.
9.4.3 Functions of the app
Viewing and editing the mowing plan
Adjusting the mowing zones
Starting mowing
Send the device to the charging station
Settings
Updates / read out (log data)
9.4.3.1 Viewing and editing the mowing plan
With this function you can set when the robot mower
should start mowing and how long it should mow for
each individual day.
There is one start time per day (later max. two start
times) available.
In this function you can also set the days on which
the lawn edges are to be mown.
m ATTENTION
Changing the mowing schedule, starting a mow-
ing operation, switching the automatic on and
o󰀨, sending the robot mower home and changing
the date and time may result in activities that are
not expected by other people. A󰀨ected persons
must therefore always be informed in advance
about possible activities of the robot mower.
9.4.3.2 Adjusting the mowing zones
In this function you can manually set up four di󰀨er-
ent mowing zones in %. By default, the function is
set to “AutoMultizone”. Here, the mower starts after
each charging process at an arbitrary place along
the boundary wire.
Use the “START” and “HOME” buttons to select the
desired digit and conrm with the “OK” button.
Proceed as described in paragraph 2-4 above.
After conrming the fourth digit with the OKbut-
ton, the new start time is stored. The word “IdLE”
appears on the display.
9.2.4 Changing the mowing time/day (Fig. 24)
The factory-set mowing time per day of 6 hours can
be changed at any time.
Press and hold the “OK” button for at least 3 sec-
onds.
The display shows the set mowing time, e.g. 06 H,
with the rst digit ashing.
Use the “START” and “HOME” buttons to select the
desired digit and conrm with the “OK” button.
After conrming the second digit with the “OK” but-
ton, the new mowing time or the new day is stored.
The word “IdLE” appears on the display.
9.3 Mowing edges
The default setting is for the robot mower (1) to mow
the edges every Tuesday and Friday.
This means that the robot mower (1) travels once
along the boundary wire (11) the rst time it mows
for the day.
m ATTENTION
In this mode, the blade disc (6) is active.
The times for edge mowing can only be set via the
app.
9.4 App control
The PX-RRM-600Wi APP robot mower can be oper-
ated via app. The app is available in the respective
app stores for Android and iOS.
m ATTENTION
The use of the app falls under the term “using”
as dened in this operating manual. Therefore,
also observe the safety regulations that apply to
this.
9.4.1 Registration
In order to use the app, registration via email is nec-
essary. Alternatively, you can also register and log in
via Facebook, with your Apple ID or with google.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Practixx PX-RRM-600WI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Practixx PX-RRM-600WI in the language / languages: English, German, French as an attachment in your email.

The manual is 6.65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info