782000
40
Zoom out
Zoom in
Previous page
1/68
Next page
32 | GB
Before storing the mower:
Clean it thoroughly (see point 10)
Charge the rechargeable battery fully.
Switch the product o󰀨.
Remove the rechargeable battery (see point 13.2).
Store the product and its accessories in a dark, dry
and frost-free place that is inaccessible to children.
The optimum storage temperature lies between 5 and
40 ˚C.
Store the robot mower (1) in its original packaging.
Cover the robot mower (1) to protect it from dust and
moisture.
Store the operating manual with the robot mower (1).
13. Maintenance / Update
m ATTENTION
Disconnect the mains plug before carrying out any
maintenance work.
Connections and repairs
Connections and repair work on the electrical equip-
ment may only be carried out by electricians.
Please provide the following information in the
event of any enquiries:
Type of current for the motor
Machine data - type plate
13.1 Replacing the blade (7) (Fig. 25)
m ATTENTION
Switch the mower o󰀨 before starting with the work.
m NOTE
The blades (7) must be replaced after approx. 8
weeks. (2 sets of 3 blades each are included in the
delivery)
Use only original blades from the manufacturer. (Art.
no. 7913001601)
m ATTENTION
Put on protective gloves before replacing the blade
(7).
m ATTENTION
All blades (7) must always be changed at the same
time. The changing of individual blades (7) is not per-
mitted.
If the Phillips screws (8) are damaged or can no
longer be tightened, these must also be replaced.
New screws are included with the replacement
blades.
To replace the blades (7), place the robot mower (1)
on a workbench with the underside facing upwards.
(We recommend a soft base to avoid damage to
the housing).
This means:
After the rst charging process, the robot mower
moves along the boundary wire in accordance with
the set % number for zone 1 and starts mowing.
After the second charging process, it does the same
in accordance with the set % number for zone 2, etc.
Example:
You have installed 200 m of boundary wire and set a
value of 25% for zone 1.
After charging, the robot mower drives 50 m along
the boundary wire and starts mowing from there.
m NOTE
This function allows you to start the robot mower in
di󰀩cult-to-reach passages, for example, to ensure a
perfect mowing pattern.
10. Cleaning
m ATTENTION
Switch o󰀨 the product with the button before cleaning.
m ATTENTION
Put on protective gloves before cleaning the rotating
blade carrier.
We recommend that you clean the product directly
after every use.
Clean the product at regular intervals using a damp
cloth and a little soft soap.
Do not use any cleaning
products or solvents; they could attack the plastic parts
of the product. Make sure that no water can penetrate
the product interior.
11. Transport
Press the button (“POWER ON/OFF” button) until
the robot mower (1) switches on. button (“POW-
ER ON/OFF” button) to switch the robot mower (1)
o󰀨.
Wear protective gloves when transporting the robot
mower (1).
Carry the robot mower (1) securely with both hands.
To prevent damage, avoid the robot mower (1) falling
to the ground from greater heights.
If this does happen, it must be immediately taken to a
specialist workshop for inspection.
Do not continue to use the robot mower (1) before this
has been done.
12. Storage/Hibernation
Your mower will give you pleasure for longer if it is
allowed to hibernate.
Although this is not a problem, we recommend that
you store your mower in a closed room, e.g. in the
garage, during the winter.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Practixx PX-RRM-600WI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Practixx PX-RRM-600WI in the language / languages: English, German, French as an attachment in your email.

The manual is 6.65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info