782000

Practixx PX-RRM-600WI Manual

38
Zoom out
Zoom in
Previous page
1/68
Next page
30 | GB
9.2.1 Changing the PIN code (Fig. 21)
• Press and hold the “START” and “HOME” buttons
simultaneously for at least 3 seconds.
• The symbol and “PInI” ash.
• Now enter the old PIN code as follows (factory set-
ting “0000”).
• The rst digit illuminates (“0---”).
• Use the “START” and “HOME” buttons to select the
desired digit.
• Conrm the digit with the “OK” button.
• The next digit illuminates (e.g. “10--).
• Proceed as described in paragraph 2-4 above.
• After you have entered the “old” PIN code and con-
rmed the fourth digit with the “OK” button, “PIn2”
appears, now you can enter the new PIN code.
• The rst digit ashes (“0---”).
• Use the “START” and “HOME” buttons to select the
desired digit.
• Conrm the digit with the “OK” button.
• The next digit ashes (e.g. “10--).
• Proceed as described in paragraph 2-4 above.
• After conrming the fourth digit with the “OK” but-
ton, the new PIN code is stored. The word “IdLE”
appears on the display.
9.2.2 Setting/changing the date/time (Fig. 22)
m NOTE
Date and time are necessary settings so that the robot
mower (1) can mow in accordance with the set mow-
ing schedule.
• The date/time setting is done in the order year - date
- time.
• Press and hold the “START” button for at least 5
seconds.
• The symbol and “PInI” ash. - symbol and a num-
ber (e.g. 2020) ashes on the display.
• Use the “START”, “HOME” and “OK” buttons to set
the year, similarly to the PIN setting.
• Then the next number illuminates (month.day e.g.
08.25 for 25 August).
• Use the “START”, “HOME” and “OK” buttons to set
the correct month and day.
• The time is displayed last (e.g. 13:25).
• Set the current time as described above.
• After conrming the fourth digit with the “OK” but-
ton, the date and time are stored. The word “IdLE”
appears on the display.
9.2.3 Changing the start time (Fig. 23)
The factory-set start time of 09:00 can be changed at
any time.
• Press and hold the “START” and “OK” buttons si-
multaneously for at least 3 seconds.
• The display shows the set start time, e.g. 13:25, with
the rst digit ashing.
m ATTENTION
The robot mower is not switched o󰀨, it has only been
stopped. Always use the “POWER ON/OFF” button to
switch the robot mower o󰀨.
Switching the robot mower on:
• The robot mower can then be restarted as de-
scribed below.
•
m NOTE
Before the robot mower (1) starts mowing, an acoustic
signal (four beeps) is heard, then the blade disc (6)
starts rotating.
• Press the button (“POWER ON/OFF” button) until
the robot mower (1) switches on.
• For the rst use, enter the default PIN code “0000”
by pressing “OK” four times when the number “0”
ashes. (The PIN code can be changed as de-
scribed in point 9.2.1).
• After conrming the fourth digit with the “OK but-
ton”, the robot mower is ready for use. The word
“IdLE” appears on the display.
m NOTE
The robot mower (1) switches o󰀨 automatically after
30 seconds if no input is made.
m ATTENTION
If the PIN code is entered incorrectly 10 times, “LOCK”
appears on the display. The device is now locked for
10 minutes before you can enter the PIN code again.
• Press the “START” button and then the “OK” button
to start mowing.
• If you press the “HOME” button and then the “OK”
button, the robot mower (1) returns to the charging
station (10) with the mowing function switched o󰀨.
The robot mower (1) operates continuously until the
battery charge is too low. The robot mower automat-
ically returns to the charging station (10). The cutter
disc is deactivated in this state.
m NOTE
After the rechargeable battery is fully charged, the ro-
bot mower starts again. Alternatively, the robot mow-
er remains in the charging station (10) in accordance
with the set mowing schedule.
(By default, the robot mows from Monday to Friday
from 09:00 - 15:00 hrs)
9.2. Settings
m NOTE
To make adjustments to the product, the robot mower
(1) must be switched on. Switch the robot mower (1)
on by pressing and holding the
button (“POWER
ON/OFF” button) until “PIN” appears on the display.
… 38 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Practixx PX-RRM-600WI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Practixx PX-RRM-600WI in the language / languages: English, German, French as an attachment in your email.

The manual is 6.65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info