628495
33
Zoom out
Zoom in
Previous page
1/105
Next page
Example Description Status Message
F01AMNOM13
Set local NOM for automixer 1 to a maximum
of 3 mics.
F01AMNOM13
F01AMNOM2?
Query current local NOM limit for automixer 2 .
F01AMNOM2x , where x is between 1 and 8
depending on the current setting of the local
NOM limit for automixer 2.
8.22. AMNOMAT -- Select NOM Attenuation on Each Output
This command enables, disables, or queries NOM attenuation for the specified output (1-8, A-D) . . NOM
attenuation is calculated as 10*log(Number of Open Microphones).
This command is a channel boolean command. See
Section 6.3 and Section 6.1 for more information on this type
of command.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
F01AMNOMAT41
Enable NOM
attenuation on output
4 .
F01AMNOMAT41
F01AMNOMATA0
Disable NOM
attenuation on output
A.
F01AMNOMATA0
F01AMNOMAT72
Toggle NOM
attenuation status on
output 7 .
F01AMNOMAT7x , where x is either 0 or 1 depending
on the current mute status of NOM attenuation on the
ouptut.
F01AMNOMATB?
Query NOM
attenuation status of
output B.
F01AMNOMATBx , where x is either 0 or 1 depending
on the current NOM attenuation status of the output.
F01AMNOMAT*1
Enable NOM
attenuation on all
outputs (1-8 and A-D)
.
F01AMNOMAT*111111111111
F01AMNOMAT*0
Disable NOM
attenuation on all
outputs (1-8 and A-D)
.
F01AMNOMAT*000000000000
F01AMNOMAT*111111110000
Enable NOM
attenuation on outputs
1-8 and disable NOM
attenuation on outputs
A-D.
F01AMNOMAT*111111110000
F01AMNOMAT*2
Toggle status of NOM
attenuation on all
outputs.
F01AMNOMAT*abcdefghijkl , where each of the
letters (a, b, etc.) is either 0 or 1 depending of the
current status of NOM attenuation on the
corresponding output. If this command was sent after
the example above, then the status message would be
F01AMNOMAT*000000001111 .
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polycom Vortex EF2280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polycom Vortex EF2280 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polycom Vortex EF2280

Polycom Vortex EF2280 User Manual - English - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info