628495
31
Zoom out
Zoom in
Previous page
1/105
Next page
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
F01AMHOLD500
Set automixer hold time to 500 ms.
F01AMHOLD500
F01AMHOLD>500
Increase automixer hold time by 500
ms.
F01AMHOLDx , where x is between 0 and 5000
depending on the current AMHOLD setting. If this
command is issued after the above example, then
the status message will be F01AMHOLD1000
F01AMHOLD?
Query automixer hold time.
F01AMHOLDx , where x is between 0 and 5000
depending on the current AMHOLD setting. If this
command is issued after the above example, then
the status message will be F01AMHOLD1000
8.19. AMLMM -- Set Last Mic On Mode for Specified Automixer
This command sets "last mic on" mode for the specified automixer. The first argument specifies which automixer
(1-2) The second parameter specifies the operation of "last mic on" mode and can be one of the following:
0 - last mic mode is off
1 - manual (use a specific mic)
2 - automatic (the last gated mic remains on)
If the AMLMM command sets "last mic on" mode to manual, but the last mic number (
AMLMN) is set to a
microphone that does not belong to the specified automixer, then the AMLMM command will fail and ERROR#042
will be generated. See the
ERROR command for more information on error messages. See Section 3.5 for more
information on dependencies within the automixer commands.
Even though this is a channel integer command, use of the wildcard character for specifying the automixer
number is not supported.
This command is a channel integer command. See
Section 6.3 and Section 6.2 for more information on this type
of command. The minimum and maximum values for this command are 0 and 2, respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
F01AMLMM10
Disable "last mic on" mode for automixer 1.
F01AMLMM10
F01AMLMM21
Set "last mic on" mode to manual for
automixer 2 .
F01AMLMM21
F01AMLMM12
Set "last mic on" mode to automatic for
automixer 1.
F01AMLMM12
F01AMLMM1?
Query the current setting of "last mic on"
mode for automixer 1.
F01AMLMM1x , where x is 0, 1, or 2 depending
on the current setting of "last mic on" mode for
automixer 1. If this command is issued after the
example above, then the status message will be
F01AMLMM12 .
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polycom Vortex EF2280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polycom Vortex EF2280 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polycom Vortex EF2280

Polycom Vortex EF2280 User Manual - English - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info