628495
32
Zoom out
Zoom in
Previous page
1/105
Next page
8.20. AMLMN -- Set Microphone That Will Remain On in Manual
Last Mic On Mode
This command sets the microphone number that will remain on when "last mic on" mode is set to manual (see
the
AMLMM command). The first argument to this command is the number of the automixer (1-2) that will be
adjusted. The second argument is the microphone number (1-8) that should be gated on if no other mics are
gated on and
AMLMM is set to manual. The value of the AMLMN command is only valid when AMLMM is set to
manual.
If "last mic on" moce is set to manual for the specified automixer and the AMLMN command attempts to specify a
microphone that does not belong to the automixer, then the AMLMN command will fail and an ERROR#043 will be
generated. See the
ERROR command for more information on error messages. See Section 3.5 for more
information on dependencies within the automixer commands.
Even though this is a channel integer command, use of the wildcard character for the automixer number is not
supported.
This command is a channel integer command. See
Section 6.3 and Section 6.2 for more information on this type
of command. The minimum and maximum values for this command are 1 and 8, respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
F01AMLMN14
Set microphone 4 as the manual last mic on
for automixer 1.
F01AMLMN14
F01AMLMN21
Set microphone 1 as the manual last mic on
for automixer 2.
F01AMLMN21
F01AMLMN1?
Query the current manual last mic on number
mic for automixer 1.
F01AMLMN1x , where x is between 1 and 8
depending on the AMLMN setting for automixer 1.
8.21. AMNOM -- Set Local Maximum Number of Open Mics for
Automixer
This command sets the local maximum number of open mics (NOM) allowed for the specified automixer. The
NOM limit is a local limit, meaning that this limit applies only to the specific Vortex that is is set on. In contrast,
the
AMGNOM command is a global limit that applies to all linked Vortex automixers with the same AMBUSID.
The first argument of this command specifies the automixer number (1-2) to adjust. The second argument
specifies the NOM limit (1-8) . Even though this is a channel integer command, use of the wildcard for specifying
the automixer number is not supported.
This command is a channel integer command. See
Section 6.3 and Section 6.2 for more information on this type
of command. The minimum and maximum values for this command are 1 and 64, respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polycom Vortex EF2280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polycom Vortex EF2280 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polycom Vortex EF2280

Polycom Vortex EF2280 User Manual - English - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info