628495
30
Zoom out
Zoom in
Previous page
1/105
Next page
F01AMGATET*12
Set gate threshold for
manual gating threshold to
12 dB for all input channels.
F01AMGATET*ÉÉÉÉÉÉÉÉ
F01AMGATET*ÉÉÉÉôôôô
Set gate threshold for
manual gating threshold to
12 dB for inputs 1-4 and 15
dB for inputs 5-8.
F01AMGATET*ÉÉÉÉôôôô
F01AMGATET*<3
Decrease gate threshold for
manual gating threshold by
3 dB for all input channels.
F01AMGATET*abcdefgh , where a-h will each be
between ä and Φ depending on the setting of the gate
threshold for each input channel. If this command is
issued after the example above, the status message
will be F01AMGATET*ììììÉÉÉÉ .
F01AMGATET*?
Query gate threshold for
manual gating threshold for
all input channels.
F01AMGATET*abcdefgh , where a-h will each be
between ä and Φ depending on the setting of the gate
threshold for each input channel. If this command is
issued after the example above, the status message
will be F01AMGATET*ììììÉÉÉÉ .
8.17. AMGNOM -- Set Global Maximum Number of Open Mics for
Bus Automixer
This command sets the global maximum number of open mics (NOM) allowed for the specified bus automixer.
The NOM limit is a global limit, meaning that this applies to all bus automixers with the same
AMBUSID. In
contrast, the
AMNOM command is a local limit that applies to the two local automixers in the EF2280.
The first argument of this command specifies the automixer number (1-2) to adjust. The second argument
specifies the NOM limit (1-64). Even though this is a channel integer command, use of the wildcard for specifying
the automixer number is not supported.
This command is a channel integer command. See
Section 6.3 and Section 6.2 for more information on this type
of command. The minimum and maximum values for this command are 1 and 64, respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
F01AMGNOM13
Set global NOM for automixer 1 to a
maximum of 3 mics.
F01AMGNOM13
F01AMGNOM2?
Query current global NOM limit for
automixer 2 .
F01AMGNOM2x , where x is between 1 and 64
depending on the current setting of the global
NOM limit for automixer 2 .
8.18. AMHOLD -- Set Automixer Hold Time
This command sets or queries the hold time (in milliseconds) for both automixers. Note that the hold time is set
globally for both automixers.
This command is an integer command. See
Section 6.2 for more information on this type of command. The
minimum and maximum values for this command are 0 and 5000, respectively.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polycom Vortex EF2280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polycom Vortex EF2280 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polycom Vortex EF2280

Polycom Vortex EF2280 User Manual - English - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info