628495
28
Zoom out
Zoom in
Previous page
1/105
Next page
Example Description Status Message
F01AMGATEC10
Configure microphone input
1 for normal gating.
F01AMGATEC10
F01AMGATEC21
Configure microphone input
2 to be forced on.
F01AMGATEC21
F01AMGATEC32
Configure microphone input
3 to be forced off.
F01AMGATEC32
F01AMGATEC3?
Query current gating control
mode for microphone input
3 .
F01AMGATEC3x , where x is 0, 1, or 2 depending on
the current gating control mode setting for microphone
input 3 .
F01AMGATEC*0
Configure microphone
inputs 1-8 for normal
gating.
F01AMGATEC*ääääääää
F01AMGATEC*äääàààåå
Configure microphone
inputs 1-3 for normal
gating, microphone inputs 4-
6 to be forced on, and
microphone inputs 7-8 to be
forced off.
F01AMGATEC*äääàààåå
F01AMGATEC*?
Query gating control mode
for all microphone inputs.
F01AMGATEC*abcdefgh , where a-h are each ä, à,
or å depending on the current setting of the gating
control mode for each channel. If this command is
issued after the example above, then the status
message will be F01AMGATEC*äääàààåå .
8.15. AMGATER -- Set Automixer Gate Ratio
This command sets the automixer gate ratio (in dB) for the specified input channel. The gate ratio is the ratio of
the speech power to noise power required to gate the microphone on. This value is only used if the input is set
to automatic gating via the
AMAUTO.
This command is a channel integer command. See
Section 6.3 and Section 6.2 for more information on this type
of command. The minimum and maximum values for this command are 0 and 100, respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
F01AMGATER312
Set gate ratio for automatic
gating threshold to 12 dB
for input channel 3 .
F01AMGATER312
F01AMGATER3>3
Increase gate ratio for
automatic gating threshold
by 3 dB for input channel 3
.
F01AMGATER3x , where x is between 0 and 100
depending on the current setting of the gate ratio for
input channel 3 . If this command is issued after the
example above, then the status message will be
F01AMGATER315 .
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polycom Vortex EF2280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polycom Vortex EF2280 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polycom Vortex EF2280

Polycom Vortex EF2280 User Manual - English - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info