628495

Polycom Vortex EF2280 Manual

35
Zoom out
Zoom in
Previous page
1/105
Next page
F01AMPRIOR*2
Set microphone inputs 1-8
to gating priority 2.
F01AMPRIOR*åååååååå
F01AMPRIOR*ààååççêê
Set gating priority of inputs
1-2 to 1, inputs 3-4 to 2,
inputs 5-6 to 3, and 7-8 to
4.
F01AMPRIOR*ààååççêê
F01AMPRIOR*?
Query gating priorities for
all microphone inputs.
F01AMPRIOR*abcdefgh , where a-h are each
between à and ê depending on the current setting of
the gating priority for each channel. If this command is
issued after the example above, then the status
message will be F01AMPRIOR*ààååççêê
8.25. AMREFB -- Set Automixer Reference Bias for the Specified
Automixer
This command sets or queries the reference bias for the automixer reference mode feature of the specified
automixer. When enabled, the automixer reference feature uses the AEC reference to prevent local microphones
from gating on audio from the remote side. The
AMREFE command controls the enabled status of this feature.
The AMREFB command can be used to bias the AEC reference signal to make the automixer even less likely to
gate on remote audio.
The first argument in this command specifies the automixer number (1-2) and the second argument specifies the
reference bias in dB.
Even though this is a channel integer command, use of the wildcard character for the automixer number is not
supported.
This command is a channel integer command. See
Section 6.3 and Section 6.2 for more information on this type
of command. The minimum and maximum values for this command are 0 and 20, respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
F01AMREFB16
Set reference bias for automixer 1 to 6 dB.
F01AMREFB16
F01AMREFB2?
Query current reference bias for automixer
2 .
F01AMREFB2x , where x is between 0 and 20
depending on the current setting of the reference
bias for automixer 2 .
8.26. AMREFE -- Enable Automixer Reference for Specified
Automixer
This command enables, disables, or queries the automixer referece feature for the specified automixer. When
enabled, the automixer reference feature uses the AEC reference to prevent local microphones from gating on
audio from the remote side. The AMREFE command controls the enabled status of this feature. The
AMREFB
command can be used to bias the AEC reference signal to make the automixer even less likely to gate on remote
audio.
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polycom Vortex EF2280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polycom Vortex EF2280 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polycom Vortex EF2280

Polycom Vortex EF2280 User Manual - English - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info